From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V3 #180
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com
Precedence: bulk


pre61-list-digest Saturday, June 26 1999 Volume 03 : Number 180



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre61 - fan to radiator distance
FTE Pre61 - 429 headers in a '58
Re: FTE Pre61 - 429 headers in a '58
FTE Pre61 - ADMIN: Extended Warrantees
FTE Pre61 - speedo teeth on output shaft

=======================================================================

----------------------------------------------------------------------

Date: Fri, 25 Jun 1999 07:14:10 -0700 (PDT)
From: shane san miguel
Subject: FTE Pre61 - fan to radiator distance

I had a Japanese car with a hot motor and the fan was
less than 1/2 an inch from the radiator. That one
lasted about 2 trips to seven grand. My Pinto has
more clearance, about 2 inches. I would guess that
the minimum distance would be dependant on whether or
not you have a flex fan, what kind of shape your motor
mounts are in, how much the motor moves around when
you stomp on it, etc. I would say any closer than a
couple inches and you're pushing it.

Shane
55 F100 5.0
15.51 87

_________________________________________________________
Do You Yahoo!?

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 25 Jun 1999 10:54:24 EDT
From: CMou139175 aol.com
Subject: FTE Pre61 - 429 headers in a '58

Does anyone know what long tube headers will fit in my '58 Custom cab w/ a
429? Thanks
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 25 Jun 1999 08:39:14 -0700
From: "Jason Wright Realtor"
Subject: Re: FTE Pre61 - 429 headers in a '58

What type of motor mounts do you have?

Jason Wright Realtor
jason rhinoproperties.com
- -----Original Message-----
From: CMou139175 aol.com
To: pre61-list-digest ford-trucks.com
Date: Friday, June 25, 1999 8:06 AM
Subject: FTE Pre61 - 429 headers in a '58


>Does anyone know what long tube headers will fit in my '58 Custom cab w/ a
>429? Thanks
>== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 25 Jun 1999 17:03:25 -0400
From: Ken Payne
Subject: FTE Pre61 - ADMIN: Extended Warrantees

Dear Ford Truck Enthusiasts list members:

We have a new advertiser on our web site. Since the beginning,
our practice with web site advertisers has been to make a brief
announcement for 2 days (this is day 1 of 2). This is our only
exception to commercial advertising on our mailing lists.
Please show your appreciation to them for helping to support the
web site and the lists by checking out their site:

WarranteeWise offers FREE ON-LINE QUOTES for vehicle service
agreements (extended warrantees) on new, pre-owned, and even
the vehicle you are currently driving. (Including "Bumper-to-Bumper"
plans). Prices are significantly lower than factory extended
warrantees.

To visit them, go to the Ford Truck Enthusiasts web site,
( http://www.ford-trucks.com ) and you'll find their link
on the left side of the screen about half-way down.

We would like to you to let then know you heard about them via
Ford Truck Enthusiasts.

Now returning you to our regularly scheduled program...

Ken Payne
Admin, Ford Truck Enthusiasts


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 25 Jun 1999 17:01:19 -0600
From: Randall Colgan
Subject: FTE Pre61 - speedo teeth on output shaft

I checked the manual on this one. Ford say there are 7, 8, or 9 teeth on
the O/P shaft depending on the application. As was stated before best way
is to count the teeth on your own shaft.


Randall Colgan
St. Albert, Alberta, Canada
1952 Ford F-1 pickup
http://www.ford-trucks.com/trueblue/
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V3 #180
********************************

+- Ford Truck Enthusiasts - 1948 - 1960 Trucks and vans --------------+
| Send posts to pre61-list....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.