From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V3 #169
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com
Precedence: bulk


pre61-list-digest Tuesday, June 15 1999 Volume 03 : Number 169



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

[none]
RE: FTE Pre61 - 3 speed Transmission
FTE Pre61 - Power Steering for a 55 F100
FTE Pre61 - wheel sources
Re: FTE Pre61 - Power Steering for a 55 F100

=======================================================================

----------------------------------------------------------------------

Date: Mon, 14 Jun 1999 08:05:44 -0500
From: Stu Varner
Subject: [none]

Bill wrote:

Date: Sun, 13 Jun 1999 19:37:06 EDT
From: WBATTE aol.com
Subject: FTE Pre61 - Wanted: 56 rims

Hello Folks:
Hunting for original STYLE rims for my 56, but a bit wider than stock. Any
help is gratefully appreciated.

ciao,
bill


Then Stu wrote:

Bill,

Try here, they are pricy but they do have a very good product.

http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.stocktonwheel.com/default.htm

Stu
Nuke GM!
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.pscico.com/stu
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Mon, 14 Jun 1999 08:23:50 -0500
From: Mike Morton
Subject: RE: FTE Pre61 - 3 speed Transmission

I have a 3 speed from a 53 above the garage. I don't know if it would be the
same ot not. I can look at it to try and find any numbers if you want.
Mike Morton

> -----Original Message-----
> From: Randy Selby [SMTP:selbyrk npoint.net]
> Sent: Sunday, June 13, 1999 11:53 AM
> To: pre61-list ford-trucks.com
> Subject: FTE Pre61 - 3 speed Transmission
>
> I opened up the 3 speed top-loader for my '50 F-1 and found 2 broken
> gears.
> The reverse-low sliding gear and the reverse idler gear are useless. Does
> anybody have extras lying around? Maybe someone that has swapped trannies
> has an old 3 speed underfoot that you'd be willing to get rid of or part
> out. All help will be appreciated.
>
> Randy
> '50 F-1 Stuck in 1st Gear
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 15 Jun 1999 11:55:40 +1200
From: Clive Pedersen - CSERVNZ
Subject: FTE Pre61 - Power Steering for a 55 F100

Has anyone used the power assisted ( ram )steering kit or the GM steering
box kit from Sacramento Vintage? I've seen a toyota 4 X 4 kit as well.

I currently have a GM column mated to a stock steering box.

I am keeping the stock front end and looking to modify it to power steering
but would like feedback on the different kits available and how easy they
were to install and how the steering feels.

Your comments/ experience please

Clive Pedersen
Email Clive.Pedersen lion-nathan.co.nz

- ---------------------------------------------------------------------
CAUTION: The information contained in this e-mail is confidential and
may be legally privileged. If the reader of this message is not the
intended recipient you are hereby notified that any use,
dissemination, distribution, or reproduction of this message is
prohibited. If you have received this message in error please forward
this message to postmaster lion-nathan.co.nz and delete all copies
of this message. Thank you.
- ---------------------------------------------------------------------
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Mon, 14 Jun 1999 22:14:41 -0400
From: Paul
Subject: FTE Pre61 - wheel sources

I am considering buying a set of new wheels and was wondering if anyone
knew of a good source on the internet, or through the list, possibly,
which would discount prices.

Thanks, Paul Gayda
54 panel named "Panemal"
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Mon, 14 Jun 1999 23:12:52 EDT
From: Jeffben56 aol.com
Subject: Re: FTE Pre61 - Power Steering for a 55 F100

This is something I've been considering also. Looking forward to anyone's
experiences with the p/s installation.

Jeff T 56 f-100
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V3 #169
********************************

+- Ford Truck Enthusiasts - 1948 - 1960 Trucks and vans --------------+....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.