>From kpayne ford-trucks.com Fri Oct 9 06:11:32 1998
Date: Fri, 9 Oct 1998 06:11:32 -0400 (EDT)
From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V2 #282
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com


pre61-list-digest Friday, October 9 1998 Volume 02 : Number 282



=======================================================================
Ford Truck Enthusiasts - 1960 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre61 - Wiper motoer
FTE Pre61 - Tilt wheel problem
FTE Pre61 - Hood

=======================================================================

----------------------------------------------------------------------

Date: Thu, 08 Oct 1998 06:13:20 PDT
From: "Bill Casady"
Subject: FTE Pre61 - Wiper motoer

Looking for a electric wiper motor [12 or 6 volt] for my 54 F250.
What I really need is the reduction gear assembly. Send info regarding
terms and arrangements. Thanks for any help.

______________________________________________________
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 08 Oct 1998 18:25:30 +0100
From: fredg454
Subject: FTE Pre61 - Tilt wheel problem

I'm converting my '56 to power steering using the Toyota 4x4 box and
adapter from mid-fifties parts. I have the box installed. Put the cab
back on the frame and went to line up my GM tilt column (a 78 Buick) and
it doesn't fit. The shift plate near the bottom of the column (that
rotates the linkage to change gears-automatic trans) is at the same
level or slightly above the floorboard in the cab. Not good. Has anyone
done this conversion?

They say it's a popular way to get power steering without cutting the
frame in half...but so far it's not been easy.
Also if someone has put a tilt wheel in their truck what did you use for
the hanger on the dash. They sell 2 or 3 inch drop hangers but their
kind of pricey for what they are?

Fred
Hot Rod '56
starting to go back together

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 08 Oct 1998 20:59:48 PDT
From: "Bill Casady"
Subject: FTE Pre61 - Hood

Need a hood in good condition for my 54 F250. Send info and
particulars regarding cost, and arrangements. Thanks for any help.

______________________________________________________
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V2 #282
********************************

+- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+
| Send posts to pre61-list ford-trucks.com, |....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.