>From kpayne ford-trucks.com Mon Oct 5 06:13:06 1998
Date: Mon, 5 Oct 1998 06:13:06 -0400 (EDT)
From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V2 #278
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com

pre61-list-digest Monday, October 5 1998 Volume 02 : Number 278

Ford Truck Enthusiasts - 1960 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
In this issue:

FTE Pre61 - HELP!!!!!
Re: FTE Pre61 - Seats



Date: Sun, 04 Oct 1998 02:00:44 -0400
From: "David M. Ackerschott"
Subject: FTE Pre61 - HELP!!!!!

I hope there is someone out there that can help me with my problem,
I am have a motor and tranny that I was told was a 351 Cleveland
and a C-6 tranny, But now i was told it's not.
the only numbers i can find on the motor is:
D1AE-9425 DA
and the trany: D2AP70062B
do these numbers tell me what i have?????
A mechanic thinks is a 351M and a FXM tranny
thanks dddavid
Visit my Web Site at: http//www.impulse.net/~idah0
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html


Date: Sun, 4 Oct 1998 22:07:55 -0400
From: "Byron Rosbrugh"
Subject: Re: FTE Pre61 - Seats

David, original 56 driver, any more info on the availability of sketches,
material, photos, etc. You got me all excited and left me hanging without
the final analysis. Any info would be helpful. Thanks Byron

- ----------
> From: cc
> To: pre61-list ford-trucks.com
> Subject: Re: FTE Pre61 - Seats
> Date: Friday, October 02, 1998 10:09 PM
> Byron,
> I recently completed the restoration on a '56 Custom Cab with the 8' bed.
> Uncle was doing most of the work with me and he was able to find an old
> dealership in Virginia that still had a small roll of the original
> We even tore off the recovered material and confirmed that this was the
> original material since I was going for the complete restoration since my
> father had purchased this truck new in '55 and had keep it ever since.
> day I hope to get a couple of pictures of it posted on the Internet. My
> says that it looks just like it was when he first bought it
> David- an original '56 driver
> -----Original Message-----
> From: Byron Rosbrugh
> To: pre61-list ford-trucks.com
> Date: Friday, October 02, 1998 1:26 PM
> Subject: Re: FTE Pre61 - Seats
> >Michelle, with the 56--is it a custom cab? If so, perhaps you could put
> >on your get a piece of seat material list or photo and some dimensions
> >the panel configuration. Would appreciate any help with my 56 Custom
> >F100 restoration. Thanks, Byron
> >
> >----------
> >> From: MichellHC aol.com
> >> To: pre61-list ford-trucks.com
> >> Subject: FTE Pre61 - Seats
> >> Date: Friday, October 02, 1998 12:40 PM
> >>
> >> I have a 56 F-600 that still has the original seat material on it. The
> >seat
> >> has been covered but reciently I made a slit in the cover and it
> >the
> >> original seat material was still underneath and it looked pretty good.
> >know
> >> what you are thinking, take a picture and send it to us or send us a
> >sample. I
> >> will be happy to do just that , but ut will take a while before I can
> >it.
> >> The truck is stored in Colo. where we stay about six months of the
> >and
> >> we jsut returned back to Houston for the winter. So it will be a while
> >before
> >> we return to Colo.
> >>
> >> Michelle
> >> Chelle's 56 Hauler
> >> == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html
> >== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html
> >
> == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html


End of pre61-list-digest V2 #278

+- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+
| Send posts to pre61-list ....

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.

Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.