|
|
pre61-list-digest Friday, September 25 1998 Volume 02 : Number 267 ======================================================================= Ford Truck Enthusiasts - 1960 and Older trucks and vans Visit our web site: http://www.ford-trucks.com/ - - - - - - - - - - - - - - - - - - - - - - - To unsubscribe, send email to: majordomo with the words "unsubscribe pre61-list-digest" in the body of the message. ======================================================================= In this issue: FTE Pre61 - weight class F250 1953 RE: FTE Pre61 - Decyphering the unknown engine RE: FTE Pre61 - Decyphering the unknown engine FTE Pre61 - Translation ======================================================================= ---------------------------------------------------------------------- Date: Thu, 24 Sep 1998 11:00:18 -0400 From: "Jonathan Bastian" Subject: FTE Pre61 - weight class F250 1953 Hi Folks, I'm retitleing a 53, F250 and need the weight and gross weight classification to get the title. Also, did these trucks come with and without beds? The one I have has a flatbed and wasn't sure if it came from the factory that way? Thanks, Jonathan Bastian == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html ------------------------------ Date: Thu, 24 Sep 1998 09:19:26 -0700 From: "Gates, Markham" Subject: RE: FTE Pre61 - Decyphering the unknown engine Who is the author and where did you (or rather - where can I) get this book? TIA! Markham Gates > Date: Wed, 23 Sep 1998 21:41:04 -0700 > From: Tulio > Subject: FTE Pre61 - Decyphering the unknown engine > > I found the book entitled "How to rebuild Big-Block Ford Engines" > invaluable in deciphering the hints and codes found on the engine. > Again, "How to rebuild Big-Block Ford Engines" was the only book I > needed to decypher my engine.. great book. > > == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html ------------------------------ Date: Thu, 24 Sep 1998 14:59:39 -0400 From: Ken Payne Subject: RE: FTE Pre61 - Decyphering the unknown engine At 09:19 AM 9/24/98 -0700, you wrote: >Who is the author and where did you (or rather - where can I) get this >book? >TIA! >Markham Gates > See the list memeber book/magazine reviews on the web site. == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html ------------------------------ Date: Thu, 24 Sep 1998 19:10:22 -0400 From: "Harvey, Blaine" Subject: FTE Pre61 - Translation > Ken, here is a rough translation. Perhaps other of us Canucks of the > Francophone persuasion can do a better job, but I am confident this is > his basic message. BH > > "My name is Eric Leroy from Belgium and I drive a 1988 F-150, 4.9 EFI > that I bought second hand. It's an import and there are very few such > vehicles around here. It is hard to find parts. There is a parts book > U.S.A. Ford dealers have with all the part numbers, illustrations and > a serial number for ordering. > > Can you tell me if this is available on a CD ROM? > > Thank you. " (end) > > ------------------------------ > > Date: Wed, 23 Sep 1998 22:36:01 -0400 > From: Ken Payne > Subject: FTE Pre61 - ADMIN: Translation? > > Can someone translate this? > > Ken Payne > CoAdmin, Ford Truck Enthusiasts > http://www.ford-trucks.com > > > > >Bonjour, > >Je m'appelle Eric LEROY, j'habite =E0 BRUXELLES (Belgium) et je roule > avec= > un > >Ford F-150 (4.9 liters EFI) model 1988. > >C'est un vehicule d'occasion sp=E9cialement import=E9 des USA. Il > n'y a= > presque > >pas de voitures comme =E7a en Europe, > >et il n'est pas facile d'avoir des pi=E8ces de rechanges. > >Il existe chez les dealers FORD U.S.A. un livre avec toutes les > pi=E8ces de > >rechange, un dessin et le serial number pour les commander. > >Pouvez vous me dire si cela existe sur CD ROM ? > > > >Merci beaucoups > > > > > == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html > > > == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html ------------------------------ End of pre61-list-digest V2 #267 ******************************** +- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+ | Send posts to pre61-list.... To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts
Registration is free, easy and gives you access to more features.
If you are already logged in and are seeing this message, your web browser is blocking session
cookies. Change your browser cookie settings to allow session cookies.
Advertising -
Terms of Use - Privacy Policy -
Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.
|