pre61-list-digest Saturday, August 15 1998 Volume 02 : Number 226



=======================================================================
Ford Truck Enthusiasts - 1960 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre61 - inner rear cab corners
FTE Pre61 - Pre 61 ignition
FTE Pre61 - pertronix question
FTE Pre61 - photos
FTE Pre61 - Re: Fenton Headers and 1950 Ford F-1 Flathead.

=======================================================================

----------------------------------------------------------------------

Date: Fri, 14 Aug 1998 08:37:40 -0400
From: "Abram H. Stauffer"
Subject: FTE Pre61 - inner rear cab corners

Folks, I need some help,
My '54 is in the body shop, partially disassembled. The body man asked
if anyone makes an inner rear cab corner. (I have the rear cab corners).
He says they would be tough to fabricate. Mid-Fifty has such a piece in
their catalogue but they won't be ready for another 2-3 months. Does
anyone know of a place that sells an inner rear cab corner? Or would it
be possible to cut this piece out of the cab of a doner in a junk yard
(if theirs is not rusted out)?
Thanks, Abe '54 F-100
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 14 Aug 1998 08:09:53 -0700
From: Marilyn Boese
Subject: FTE Pre61 - Pre 61 ignition

This is response to Dan Lee and Gary Vandergrift re: ignition
improvements available. Mallory makes an electronic ignition for
flathead Ford that is marketed by Patrick in AZ. I have used these and
also found an alternative. The Mallory has no vacuum advance and you
lose 3-4 mpg. Jerry Jobe in SoCal has designed an electronic ignition
that retains vacuum advance and gas mileage. Ph 714-637-0733, fax
714-637-2120.
Red Hamilton

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 14 Aug 1998 08:32:55 -0700
From: Marilyn Boese
Subject: FTE Pre61 - pertronix question

I recall seeing a posting in July from someone wanting any experience
with the Pertronix electronic modules. We have one on our 64 Country
Squire swgn, works fine. They work on 49-up Ford fh, Y-Block and FE, any
12V negative ground system. If you have 12V positive ground, you need an
additional part, which I can supply.
Red Hamilton

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 14 Aug 1998 22:10:52 -0400
From: Ken Payne
Subject: FTE Pre61 - photos

This person is looking for some help. If anyone can give it, please
send your replies to: UBUSDAD aol.com

Show him the FTE spirit!

Ken Payne
CoAdmin, Ford Truck Enthusiasts
http://www.ford-trucks.com

>>From UBUSDAD aol.com Fri Aug 14 14:57:56 1998
>From: UBUSDAD aol.com
>Date: Fri, 14 Aug 1998 14:56:53 EDT
>To: webmaster ford-trucks.com
>Subject: photos
>
>any chance i can convince one of your members to send me some shots of his 56
>f-100 int? been running all over to all web sites to get photos for my model
>kits.and after my fairlane 66 427 kit is done im looking foward to building my
>56 truck kit from revell/monogram built the hot rod version now need to build
>the stock version. will pay postage. please write if possible.ps did you know
>nobody has pictures of a 66 fair lane int or of a 427 im shocked,the mopar
>guys always have pictures of their stuff but not the FORD guys?
>
>
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 14 Aug 1998 23:38:21 -0500
From: aw2bme
Subject: FTE Pre61 - Re: Fenton Headers and 1950 Ford F-1 Flathead.

Help!
I have rebuilt my V-8 Flatty...has 77B Isky Cam & 390cfm / 4bbl. Holley.
Now I am installing the engine...and, my cast iron Fenton Headers
are cramed up against my steering gear box! The engine won't fit!
I am going crazy try'n to come up with a good solution.
Has anyone had the same problem? What is recommended?

Should you be interested in taking a look at my truck here's the
web site----> http://www.ford-trucks.com//lc/lc.php?action=do&link=http://members.tripod.com/~aw2bme

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V2 #226
********************************

+- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+
| Send posts to pre61-list ....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.