Return-Path:
Date: Mon, 18 May 1998 04:30:03 -0400 (EDT)
From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V2 #136
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com


pre61-list-digest Monday, May 18 1998 Volume 02 : Number 136



=======================================================================
Ford Truck Enthusiasts - 1960 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

Re: FTE Pre61 - Tilt front ends
Re: FTE Pre61 - great time at the show in pigeon forge
Re: FTE Pre61 - great time at the show in pigeon forge
Re: FTE Pre61 - Re:52-56 steering boxes?
FTE Pre61 - Pigeon Forge
Re: FTE Pre61 - great time at the show in pigeon forge

=======================================================================

----------------------------------------------------------------------

Date: Sun, 17 May 1998 21:06:56 EDT
From: KLaff61624
Subject: Re: FTE Pre61 - Tilt front ends

Trent, someone else may have answered your question about how to contact
Fairlane. I have gone to pigion-forge and the events book has their address
and ph. no. (517) 224-6460. Fairlane Company 107 w. railroad st. Dept
RC, St. Johns, MI 48879
Hope this helps. Ken L.
= Ford Truck Enthusiasts ==============================================
Send posts to: pre61-list ford-trucks.com
Send unsubscribe requests to: majordomo ford-trucks.com with
"unsubscribe pre61-list" in the message body.
=======================================================================

------------------------------

Date: Sun, 17 May 1998 21:25:19 EDT
From: KLaff61624
Subject: Re: FTE Pre61 - great time at the show in pigeon forge

Yealp Ray they sure were. I hope someone got hold of a pair for you while they
were there. I didn't have access to a computor or I'd checked them out for
you, but I saw both the visors and the cab-over running boards.
Ken L.
= Ford Truck Enthusiasts ==============================================
Send posts to: pre61-list ford-trucks.com
Send unsubscribe requests to: majordomo ford-trucks.com with
"unsubscribe pre61-list" in the message body.
=======================================================================

------------------------------

Date: Sun, 17 May 1998 21:58:18 -0500
From: Ray Cardogno
Subject: Re: FTE Pre61 - great time at the show in pigeon forge

>Yealp Ray they sure were. I hope someone got hold of a pair for you while they
>were there. I didn't have access to a computor or I'd checked them out for
>you, but I saw both the visors and the cab-over running boards.
>Ken L.

Go ahead, make me cry );


= Ford Truck Enthusiasts ==============================================
Send posts to: pre61-list ford-trucks.com
Send unsubscribe requests to: majordomo ford-trucks.com with
"unsubscribe pre61-list" in the message body.
=======================================================================

------------------------------

Date: Sun, 17 May 1998 22:28:02 EDT
From: JRFiero
Subject: Re: FTE Pre61 - Re:52-56 steering boxes?

In a message dated 98-05-16 19:56:06 EDT, you write:


box. will it fit 53-56. >>

Well, sir, I don't believe it will fit. My 1948-1956 Parts and Accessories
Illustrated Catalog and Text Catalog show different part numbers for the 48-52
shaft and worm assembly (7HC 3524), the 53-55 (TAAA 3524-A) and 56 (B6C
3524-A). Similar the Steering Sector, ' cept the 53-56 are the same. The
shaft and worm assembly have different lengths to go with their different part
numbers. I can't tell what the sector differences are. I'm confused about
the housing tho, cause the books list a part number for the 53-56 (TAAA
3548-A) but not for the 48-52.
That said, I sure could use a tight box to fit in my 51, and I'm virtually
certain that the 51-52 are the same. If you're getting rid of the truck and
might pull the gearbox and shaft/column, I'd be interested. And particularly
the steering wheel and horn parts. My truck has a '50 car wheel on it.
= Ford Truck Enthusiasts ==============================================
Send posts to: pre61-list ford-trucks.com
Send unsubscribe requests to: majordomo ford-trucks.com with
"unsubscribe pre61-list" in the message body.
=======================================================================

------------------------------

Date: Sun, 17 May 1998 23:12:47 -0400
From: "Don & Teresa Neighbors"
Subject: FTE Pre61 - Pigeon Forge

Hey, Y'all!

It was wall-to-wall Ford trucks in Pigeon Forge this weekend! I only made
one day of the show, but I had more fun than is allowed by law! I climbed
into the bed of Ken Lafoon's truck and took a BUNCH of pictures of the
parade. Imagine three lanes of Ford trucks stretched out as far as the eye
can see! I am NOT making this up!
Gotta get Grover to the show next year...

Don Neighbors
'54 F250 Named Grover
= Ford Truck Enthusiasts ==============================================
Send posts to: pre61-list ford-trucks.com
Send unsubscribe requests to: majordomo ford-trucks.com with
"unsubscribe pre61-list" in the message body.
=======================================================================

------------------------------

Date: Mon, 18 May 1998 00:13:10 -0400
From: "John Miller"
Subject: Re: FTE Pre61 - great time at the show in pigeon forge

>
> Go ahead, make me cry );


Well ok if you insist, but I have these cards with numbers on them here in
case you change your mind.... :)


John Miller, FoMoCoNUT Gibralter.net
96 F-350 Reg Cab XLT, 4x4, 460 w/ A4OD, My Baby "Baloo"
75 F-100 Reg Cab Ranger, 2wd, 360, C6, Daily Driver " Lucy"
and "always" looking ! ! !
= Ford Truck Enthusiasts ==============================================
Send posts to: pre61-list ford-trucks.com
Send unsubscribe requests to: majordomo ford-trucks.com with
"unsubscribe pre61-list" in the message body.
=======================================================================

------------------------------

End of pre61-list-digest V2 #136
********************************

+- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.