Return-Path:
Date: Sun, 21 Dec 1997 03:50:22 -0700 (MST)
From: owner-fordtrucks-digest ListService.net (fordtrucks-digest)
To: fordtrucks-digest ListService.net
Subject: fordtrucks-digest V1 #85
Reply-To: fordtrucks ListService.net
Sender: owner-fordtrucks-digest ListService.net


fordtrucks-digest Sunday, December 21 1997 Volume 01 : Number 085



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To remove yourself for our list send email to:
fordtrucks-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Mustang II IFS [Randall Colgan ]
Re: fordtrucks-digest V1 #84 [RJC988 ]
Re: fordtrucks-digest V1 #84 [Ken Payne ]
Re: Wax? ["Howard Tarnoff" ]
Re: Chat Thing ["Brian Noel" ]
Re: ADMIN: IRC chat [Art Starkey ]

=======================================================================

----------------------------------------------------------------------

Date: Sat, 20 Dec 1997 10:46:41 -0700
From: Randall Colgan
Subject: Mustang II IFS

Hi there. I've finally found a 77 mustang II I can strip the front end off
and put under my 52 F-1. Has anyone done this? I'm wondering if the
mustang cross member is usable. Or will I have to purchase an aftermarket
one, say from Sacramento Vintage Ford. I know the springs, spring cages,
spindals are supposed to work. If anyone has done this, I'd appreciate a
little advice as to what is usable and what is not.

Merry Christmas,

=========================================
Randall Colgan
University of Alberta
Edmonton, Canada
1952 F-1 Ford Truck
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.ualberta.ca/~rcolgan/home.html

C:\DOS C:\DOS\RUN RUN\DOS\RUN



Best file compression around: "DEL *.*" = 100% compression
=========================================

------------------------------

Date: Sat, 20 Dec 1997 14:46:13 EST
From: RJC988
Subject: Re: fordtrucks-digest V1 #84

Kenny,

Just wanted to drop a note and say what a lovely family you have. I have
enjoyed the site and the sub-list. Both have been a great help to me in
building my 57 F-100. Maybe mine will get on the pic page? I noticed the other
57 has been taken off. At least I have the wallpaper for my PC. Maybe I will
see you in Pigeon Forge!

Have a great Christmas. Remember the Reason for the season!!
Glenn Gipson

------------------------------

Date: Sat, 20 Dec 1997 15:20:08 -0500
From: Ken Payne
Subject: Re: fordtrucks-digest V1 #84

At 02:46 PM 12/20/97 EST, you wrote:
>Kenny,
>
>Just wanted to drop a note and say what a lovely family you have. I have
>enjoyed the site and the sub-list. Both have been a great help to me in
>building my 57 F-100. Maybe mine will get on the pic page? I noticed the
other
>57 has been taken off. At least I have the wallpaper for my PC. Maybe I will
>see you in Pigeon Forge!
>
>Have a great Christmas. Remember the Reason for the season!!
>Glenn Gipson

Send in a photo (address is on the web site) and I'll scan it for
the web site. It doesn't matter if the truck is finished or not.
As to picture removal, I've taken all pictures which I cannot verify
the source off the web site. This has been a long process (2 months)
as I slowly try to track all pictures. I want to make sure I'm not
violating an copyrights.

Thanks about the family, I like them too!

Ken

PS - We'll be in Pigeon Forge this year.

------------------------------

Date: Tue, 16 Dec 1997 21:37:47 -0500
From: "Howard Tarnoff"
Subject: Re: Wax?

Terry,

I have been strongly urged by the professional who restored my truck to
NEVER use a wax of any kind. I use glazing compond in very small quantity
on new terry towel. These towels are disposed of, in other word a new
towel
each use.

For a quick clean he told me to use mothers finale inspection.

Regards,

Howard
55 F100

- ----------
> From: John Pease
> To: fordtrucks ListService.net
> Subject: Wax?
> Date: Thursday, November 06, 1997 1:02 PM
>
> What does wax with silicone do to paint, and should I avoid using it on
my
> '55 f350? What is the best wax to use?
>
> Thanks,
>
> Terry
>
>
> +-------------- Ford Truck Enthusiasts - 1960 and Older --------------+
> | Send posts to fordtrucks listservice.net, removal form on the web |
> | site. |
> +---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

------------------------------

Date: Sat, 20 Dec 1997 15:39:53 PST
From: "Brian Noel"
Subject: Re: Chat Thing

Ken,
Could you please send me some information on the chat room thing you
were talking about? I am building a classic trucks web page and want to
put a chat room on it so this information would help. Please E-mail it
to me directly at F100nut aol.com Thanks.

- -Brian

______________________________________________________

------------------------------

Date: Sat, 20 Dec 1997 18:15:15 -0800
From: Art Starkey
Subject: Re: ADMIN: IRC chat

At 10:00 PM 12/10/97 -0500, you wrote:
>I'm in the process of setting up an IRC chat channel to
>replace the chat script on the web page. In order to
>register the channel I need 7 "supporters". This does
>not mean you commit to chatting every night but you
>will drop in occasionally. Any volunteers?
>
>Ken
>Admin
>
>+-------------- Ford Truck Enthusiasts - 1960 and Older --------------+
>| Send posts to fordtrucks listservice.net, removal form on the web |
>| site. |
>+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+
>
> Ken put me down I enjoy chatting. Haven't tried IRC but am game to try
anything once.

Art....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.