Return-Path:
X-Sender: kpayne mindspring.com
Date: Mon, 06 Oct 1997 10:00:02 -0400
To: kpayne mindspring.com
From: owner-fordtrucks-digest ListService.net (fordtrucks-digest) (by way of Ken Payne )
Subject: fordtrucks-digest V1 #13


fordtrucks-digest Monday, October 6 1997 Volume 01 : Number 013



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
fordtrucks-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Re: fordtrucks-digest V1 #12 [Raynesbear aol.com]
Re: '48 Ford F7 [Dan Wentz ]
Vin Location [Dick Driver ]
Vin location [Dick Driver ]

=======================================================================

----------------------------------------------------------------------

Date: Sun, 5 Oct 1997 11:11:28 -0400 (EDT)
From: Raynesbear aol.com
Subject: Re: fordtrucks-digest V1 #12

What is this file I keep getting called "WINMAIL.DAT (1516 bytes)" ? I have
downloaded it, but I do not know where to run it or what is in it. Please
explain! I am using AOL as my main carrier and I use Netscape as my web
browser.
Thanks for helping me out with this.
Jack

------------------------------

Date: Sun, 05 Oct 1997 09:55:50 -0700
From: Dan Wentz
Subject: Re: '48 Ford F7

>Have acquired a 1948 F7 that has not "run" in 20+ years.
>Flathead has "Lincoln" on the heads.
>Questions:
>
>6 or 12 Volt

Most likely 6 volt, though it could have been converted. Look at your
headlights and see if they say whether it's 6 or 12 (or look at your other
electrical goodies, like the coil).

>mechanical or electric fuel pump-if mechanical where was it mounted

Mechanical. Mounted on the intake manifold at the very back.

>purpose of switch mounted under dash directly under start button

Turns the instrument lights on and off.

~Dan

1992 Ford Mustang LX
1950 Ford F1, 351C-2V
Check out my F1 page: http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.GeoCities.com/MotorCity/3623

------------------------------

Date: Sat, 04 Oct 1997 17:59:01 -0700
From: Dick Driver
Subject: Vin Location

> ------------------------------
>
> Date: Fri, 3 Oct 1997 21:48:04, -0500
> From: GEGK00A prodigy.com ( DAN LEE)
> Subject: VIN Location
>
> I am trying to get my '53 F100 registered here in Ca. I need to
> locate the Vehicle Identification Number. I have looked at the
> firewall, glove box and doorpost with no luck. I have heard that the
> frame is also marked. Can anyone tell me where to look?
>
> Dan Lee
> '53 F100 351C-4V
>
> ------------------------------

Dan,

In my "National Service Data" book on 1952-1958 all makes and models it
lists under Ford Truck 1951-53, "Vehicle Number: Stamped in upper left
hand corner of RATING PLATE on glove box door assembly (except Parcel
Delivery) or on dash panel (parcel Delivery only) and stamped on left
side of frame near steering gear mounting bracket." If you can locate
this number e-mail me back and I will be happy to fill you in on the
details that I have if you need it.

Dick Driver (driver rockisland.com)
>
>

------------------------------

Date: Sat, 04 Oct 1997 18:15:06 -0700
From: Dick Driver
Subject: Vin location

>
> ------------------------------
>
> Date: Fri, 03 Oct 1997 21:59:17 -0500
> From: Suzanne & Steve Ainey
> Subject: VIN location on 39
>
> Just purchased a 1939 Ford pickup. I need to verify the VIN number on
> it. I've found the one on the driver side of the frame, but three of
> the numbers are unreadable. Is there another place that the VIN is
> located. As far as I know the truck is all original.
>
> Additionally anyone know where I can find a three carb setup for a 39
> flathead?
>
> Steve
>
> ------------------------------
> Steve,

The information on vin location that I have for your truck is as
follows, hope it helps. "FORD 1939-40 V8 "60", "90", "100" TRUCK
MODELS". "SERIAL & ENGINE NUMBER:-Stamped on top of clutch housing and
on left frame side member near generator."

"FORD 1939-40 V8 "60" PASSENGER CARS & COMMERCIAL MODELS". "SERIAL &
ENGINE NUMBER:-Stamped on top of clutch housing and on left frame side
member in front of dash bracket".

Good Luck
Dick Driver
driver rockisland.com

>

------------------------------

End of fordtrucks-digest V1 #13....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.