Return-Path:
Date: Wed, 3 Dec 1997 03:50:26 -0700 (MST)
From: owner-fordtrucks-digest ListService.net (fordtrucks-digest)
To: fordtrucks-digest ListService.net
Subject: fordtrucks-digest V1 #67
Reply-To: fordtrucks ListService.net
Sender: owner-fordtrucks-digest ListService.net


fordtrucks-digest Wednesday, December 3 1997 Volume 01 : Number 067



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To remove yourself for our list send email to:
fordtrucks-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Chat Room ["Don & Teresa Neighbors" ]
Re: Clip for my 52 F-1 [JIM_HOLLINGSWORTH HP-Vancouver-om1.om.hp.com]
1955 F100 ["DASH8" ]
Re: fordtrucks-digest V1 #66 [jc& terry ]
Re: fordtrucks-digest V1 #66 ["R. Garber" ]
Re: Chat Room [Ken Payne ]

=======================================================================

----------------------------------------------------------------------

Date: Tue, 2 Dec 1997 06:47:20 -0500
From: "Don & Teresa Neighbors"
Subject: Chat Room

Hey Ken!

I like the new chat room. My only complaint is that sometimes when I log
off, it won't let me go back to the Ford Trucks Page. Could this be one of
the bugs you were speaking of?

Don N.

------------------------------

Date: Tue, 2 Dec 97 07:52:54 -0800
From: JIM_HOLLINGSWORTH HP-Vancouver-om1.om.hp.com
Subject: Re: Clip for my 52 F-1

When you're about to screw up a perfectly good Ford by putting CH**Y
running gear in it and then post this fact to a _FORD_ ML, you've gotta
expect to put up with some S**T.

Later,
JDH
55 F100 Custom (with _FORD_ running gear!!!)


______________________________ Reply Separator _________________________________
Subject: Re: Clip for my 52 F-1
Author: Non-HP-wm-69 (wm_69 yahoo.com) at HP-Vancouver,mimegw1
Date: 12/1/97 3:39 PM


- ---JIM_HOLLINGSWORTH HP-Vancouver-om1.om.hp.com wrote:
>
> Kind'a makes ya pucker, don't it????
>
> Later,
> JDH
> 55 F-100
>
>
> ______________________________ Reply Separator
_________________________________
> Subject: Re: Clip for my 52 F-1
> Author: Non-HP-duckdon (duckdon pacific.net) at HP-Vancouver,mimegw1
> Date: 11/29/97 9:03 AM
>
>
> Randall Colgan wrote:
> >
> > I am looking to put a clip on my 52 and am looking for suggestions.
> > Escentially I want the IFS, disk brakes and steering system (front
axle is
> > gone). I've been told that a volaire clip works good. I know
mustang ii
> > would also work. However, I want something with more beef. The
motor I
> > want to put in it is a 350 Vortec with EFI and overdrive tranny. I
hear the
> > mustang ii rack wears out prematurely with all that weight.
> >
> > Does anyone have any suggestions on what might work best??
> >
> > Regards,
> >
> > ======================
> > Randall Colgan
>
> What is wrong with the above statement?!?!?!?!
> --
> Don Grossman
> duckdon pacific.net
>
>
> 63 Ford F-250 4x4 67' 390, t-98, Spicer 24, Dana 60, Dana 44,
power
> steering, power brakes, and now ON BOARD AIR!
>
There is nothing wrong with what Randall wrote. I would love to get
my hands on a Chevy 350 EFI! I think that it would be great to have
EFI, not to mention that it's a Vortec. I don't see anything wrong
with that except that I wish I had that engine in my truck. I just
have a Chevy 350 going to a Camero rear end with Chevy breaks all
around, Chevy master cylinder and even the Chevy bolt pattern on the
Mustang II IFS. The shifter is out of a Chevy too, same with the head
light switch. I also have Dodge and (gasp) import parts in it as
well. I use what ever works, is available and cheepest because I
don't have lots of money. Keep up the good work Randall.
Scott
1952 Ford Pickup
==
Please take a look at my 1952 Ford Pickup Page:
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.geocities.com/MotorCity/Downs/9731/

_________________________________________________________
DO YOU YAHOO!?

+-------------- Ford Truck Enthusiasts - 1960 and Older --------------+
| Send posts to fordtrucks listservice.net, removal form on the web |
| site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

------------------------------

Date: Wed, 3 Dec 1997 17:21:22 -0500
From: "DASH8"
Subject: 1955 F100

Hello, Im new to the list. I just bout a 1955 F100 I would like to install
a 9". could any body tell me what years would work on my truck. thanks,

Ken Marty

------------------------------

Date: Tue, 02 Dec 1997 16:40:26 -0800
From: jc& terry
Subject: Re: fordtrucks-digest V1 #66

>
>There is nothing wrong with what Randall wrote. I would love to get
>my hands on a Chevy 350 EFI! I think that it would be great to have
>EFI, not to mention that it's a Vortec. I don't see anything wrong
>with that except that I wish I had that engine in my truck. I just
>have a Chevy 350 going to a Camero rear end with Chevy breaks all
>around, Chevy master cylinder and even the Chevy bolt pattern on the
>Mustang II IFS. The shifter is out of a Chevy too, same with the head
>light switch. I also have Dodge and (gasp) import parts in it as
>well. I use what ever works, is available and cheepest because I
>don't have lots of money. Keep up the good work Randall.
>Scott
>1952 Ford Pickup
now here is a man that didn't let that namby pamby brand loyalty crap stand
between him and his dream. availability and price are the big difference
between "i want" and "i have". as i said before, i've heard all that tired
stuff. i deal in what works fer me too.
i have a massaged small block chevy in my 59 f-100 and if you think talking
about bolting chevys to fords makes you pucker, come ride in mine or better
yet bring yur big block ford or yur HO 5.0 and run me and find out what
pucker really is.

PS: bring yur billfold

T-bird Terry

------------------------------

Date: Tue, 02 Dec 1997 19:54:54 -0600
From: "R. Garber"
Subject: Re: fordtrucks-digest V1 #66

I use what ever works, is available and cheepest because I
>>don't have lots of money. Keep up the good work Randall.
>>Scott
>>1952 Ford Pickup
>now here is a man that didn't let that namby pamby brand loyalty crap stand
>between him and his dream. availability and price are the big difference
>between "i want" and "i have". as i said before, i've heard all that tired
>stuff. i deal in what works fer me too.
> i have a massaged small block chevy in my 59 f-100 and if you think talking
>about bolting chevys to fords makes you pucker, come ride in mine or better
>yet bring yur big block ford or yur HO 5.0 and run me and find out what
>pucker really is.
>
>PS: bring yur billfold
>
>T-bird Terry
>
Let the games begin!!!

All Ford (but have been, Buick, GMC)

Rich

------------------------------

Date: Tue, 02 Dec 1997 21:28:03 -0500
From: Ken Payne
Subject: Re: Chat Room

At 06:47 AM 12/2/97 -0500, you wrote:
> Hey Ken!
>
> I like the new chat room. My only complaint is that sometimes when I log
>off, it won't let me go back to the Ford Trucks Page. Could this be one of
>the bugs you were speaking of?
>
> Don N.

Yes, this is one of the bugs. Sometimes a "Error - Data Missing"....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.