Return-Path:
Date: Wed, 26 Nov 1997 03:50:22 -0700 (MST)
From: owner-fordtrucks-digest ListService.net (fordtrucks-digest)
To: fordtrucks-digest ListService.net
Subject: fordtrucks-digest V1 #61
Reply-To: fordtrucks ListService.net
Sender: owner-fordtrucks-digest ListService.net


fordtrucks-digest Wednesday, November 26 1997 Volume 01 : Number 061



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To remove yourself for our list send email to:
fordtrucks-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Re: Wheel Offset ["Brian Noel" ]
Re: Brake Questions ["Brian Noel" ]
Re: Wiring harness [OBKBEE aol.com]
Re: Wheel Offset [Gary Haselbusch ]

=======================================================================

----------------------------------------------------------------------

Date: Tue, 25 Nov 1997 06:31:37 PST
From: "Brian Noel"
Subject: Re: Wheel Offset

Mel,
I am not sure about the offset, but I do have a question for you....
Are you going to install wheel tubs in the bed? I am not sure if it is
required, but I have heard that 235's are the largest that will fit in
the stock fenders, nicely anyway.

- -Brian
F100nut aol.com -or- F100nut hotmail.com


______________________________________________________

------------------------------

Date: Tue, 25 Nov 1997 06:54:15 PST
From: "Brian Noel"
Subject: Re: Brake Questions

Rich,
Hi, You can get the clips for the brake lines from Bob's F-100 Parts,
They are located on 9372 Mission € Riverside, California 92509 Their
Phone and Fax Numbers follow.. Phone:(909)681-1956 € Fax:(909)681-1960
If you are interested in a wiring harness as well, Bob's also carries an
exact duplicate of the original, only with 4? accessory lines, which can
be trimmed off if you are doing a restoration. I am not sure about the
price, or if it has the cloth covered wire, but I have heard they are
one of the best kits you can get because everything is already the right
length. -Brian
F100nut aol.com € F100nut hotmail.com

______________________________________________________

------------------------------

Date: Tue, 25 Nov 1997 13:45:34 -0500 (EST)
From: OBKBEE aol.com
Subject: Re: Wiring harness

Rich,
Ron Francis Wire Works is where I am getting mine from for my 55'. I am
still waiting for my engine back, you can give them a call at 1-800-292-1940.
Good luck-kent

------------------------------

Date: Tue, 25 Nov 1997 17:18:01 -0800
From: Gary Haselbusch
Subject: Re: Wheel Offset

Brian Noel wrote:
>
> Mel,
> I am not sure about the offset, but I do have a question for you....
> Are you going to install wheel tubs in the bed? I am not sure if it is
> required, but I have heard that 235's are the largest that will fit in
> the stock fenders, nicely anyway.
>
> -Brian
> F100nut aol.com -or- F100nut hotmail.com
>
> ______________________________________________________
> > +-------------- Ford Truck Enthusiasts - 1960 and Older --------------+
> | Send posts to fordtrucks listservice.net, removal form on the web |
> | site. |
> +---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+
I have 275-60-15's on my rears and 225-60-15's on the fronts the rears
are as wide as I can go without tubbing, Gary

------------------------------

End of fordtrucks-digest V1 #61
*******************************

=======================================================================....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.