Return-Path:
Date: Tue, 25 Nov 1997 03:50:17 -0700 (MST)
From: owner-fordtrucks-digest ListService.net (fordtrucks-digest)
To: fordtrucks-digest ListService.net
Subject: fordtrucks-digest V1 #60
Reply-To: fordtrucks ListService.net
Sender: owner-fordtrucks-digest ListService.net


fordtrucks-digest Tuesday, November 25 1997 Volume 01 : Number 060



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To remove yourself for our list send email to:
fordtrucks-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Web page [Dave ]
Brake Questions ["R. Garber" ]
Re: Brake Questions [Art Starkey ]

=======================================================================

----------------------------------------------------------------------

Date: Mon, 24 Nov 1997 18:48:08 -0800
From: Dave
Subject: Web page

I'm sorry for this repeat but I lost my links. I'm looking
for the page that had the production numbers for Merc Pickups.
Thanks..
Dave (53&54 Merc)

------------------------------

Date: Mon, 24 Nov 1997 21:05:05 -0600
From: "R. Garber"
Subject: Brake Questions

>Hello All,
>
>I have a couple of brake line questions. I'm sure everyone has replaced
>the brake lines so here goes. What kind of clips were used to hold the
>line to the frame? I can't seem to find the orignal clips. Also, the gravel
>guards (I think thats what it's called) is it a spring or wire wound around
>the line? Any suggestions as to what I might use? I want it to look like
>it did when it was new and these little things are turning out to be harder
>than I thought.
>
>I'm also looking at the wiring, I know someone out there wrote awhile back
>and had ordered a harness? Any feed back, was it an exact duplcate?
>How much?
>I'm thinking about rewiring it myself but I can't find that cloth covered wire.
>I was thinking about using PVC wire and at the ends, where you would see
>exposed wire to use a good piece of orignal harness crimped and soldered.
>Any comments?
>
>Thanks,
>
>Rich
>54 F100
>
>
>

------------------------------

Date: Mon, 24 Nov 1997 23:07:50 -0800
From: Art Starkey
Subject: Re: Brake Questions

At 09:05 PM 11/24/97 -0600, you wrote:
>
>>Hello All,
>>
>>I have a couple of brake line questions. I'm sure everyone has replaced
>>the brake lines so here goes. What kind of clips were used to hold the
>>line to the frame? I can't seem to find the orignal clips. Also, the gravel
>>guards (I think thats what it's called) is it a spring or wire wound around
>>the line? Any suggestions as to what I might use? I want it to look like
>>it did when it was new and these little things are turning out to be harder
>>than I thought.
>>
>>I'm also looking at the wiring, I know someone out there wrote awhile back
>>and had ordered a harness? Any feed back, was it an exact duplcate?
>>How much?
>>I'm thinking about rewiring it myself but I can't find that cloth covered
wire.
>>I was thinking about using PVC wire and at the ends, where you would see
>>exposed wire to use a good piece of orignal harness crimped and soldered.
>>Any comments?
>>
>>Thanks,
>>
>>Rich
>>54 F100
>>
>>
>>
>
>+-------------- Ford Truck Enthusiasts - 1960 and Older --------------+
>| Send posts to fordtrucks listservice.net, removal form on the web |
>| site. |
>+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+
>
> Rich Check with Dennis Carpenter he carries orignal wireing harneses, may
also be able to help with brake lines.


Art

------------------------------

End of fordtrucks-digest V1 #60
*******************************
....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.