|
|
Return-Path: Date: Mon, 29 Sep 1997 03:50:19 -0600 (MDT) From: owner-fordtrucks-digest To: fordtrucks-digest Subject: fordtrucks-digest V1 #5 Reply-To: fordtrucks Sender: owner-fordtrucks-digest fordtrucks-digest Monday, September 29 1997 Volume 01 : Number 005 ======================================================================= Ford Truck Enthusiasts - 1960 And Older Trucks Digest Visit our web site: http://www.ford-trucks.com/ - - - - - - - - - - - - - - - - - - - - - - - To unsubscribe, send email to: fordtrucks-digest-request with the word "unsubscribe" in the body of the message. For help, send email to the same address with the word "help" in the body of the message. ======================================================================= In this issue: Door Locks ["Don & Teresa Neighbors" ] '52 Ford P/U [Tyler ] Re: '52 Ford P/U [TNickolson ADMIN: Please give me any event information you have [Ken Payne Temp Guage & Sending Units ["Howard Tarnoff" ] Stock Air Cleaner Wanted ["Howard Tarnoff" ] ADMIN: For those with 61-79 trucks [Ken Payne ] 1953 F-1 [Jay Phillips ] Tire Pressure ["Don & Teresa Neighbors" ] ======================================================================= ---------------------------------------------------------------------- Date: Sun, 28 Sep 1997 09:36:23 -0400 From: "Don & Teresa Neighbors" Subject: Door Locks My '54 has is a Standard Cab, and it is fitted with the passenger side door lock as well, which my friends who have been with me in this project think is a real hoot. Can you imagine sliding across to the driver's side if the truck were equipped with bucket seats and a console?;-) Don ------------------------------ Date: Sun, 28 Sep 1997 09:41:47 -0700 From: Tyler Subject: '52 Ford P/U I'm new to the list. In fact I'm new to antique trucks. My brother has inherited my grandfather's ?52 p/u truck. Where do you located S/N and how do you determine year it was made? Thanks, Tyler ------------------------------ Date: Sun, 28 Sep 1997 11:17:23 -0400 (EDT) From: TNickolson Subject: Re: '52 Ford P/U Serial number is on a plate attached to the inside of your glove box lid. If that is missing, in is stamped on the frame under the , I beleive , on the front drivers side by the radiator. ------------------------------ Date: Sun, 28 Sep 1997 12:47:56 -0400 From: Ken Payne Subject: ADMIN: Please give me any event information you have The events page on the web site is out of date. If anyone has Ford (if it includes trucks), Ford truck or truck (if it includes Fords) event information, please send the information to me so I can update the page. Thanks, Ken ------------------------------ Date: Sun, 28 Sep 1997 15:39:14 -0400 From: "Howard Tarnoff" Subject: Temp Guage & Sending Units Hi Gang, Can anyone tell me how to use the stock temp guage and sending units in a 1955 F100 that has a stock 317 and has been converted to 12 volts? Thanks in advance, Howard HTSTDS ------------------------------ Date: Sun, 28 Sep 1997 15:51:15 -0400 From: "Howard Tarnoff" Subject: Stock Air Cleaner Wanted Hello, I have just purchased a very mint (sorry, not to brag as I did not do the work) 1955 F100. It was restored to stock condition with one minor exception that bothers me a bit. Does anyone have or know where I may locate a sock air cleaner assembly for a 55 317 with 2 bbl? Thanks in advance for any assistance. Also looking for information on F100 Clubs in Massachusetts. Howard Tarnoff, Franklin, MA HTSTDS ------------------------------ Date: Sun, 28 Sep 1997 18:00:51 -0400 From: Ken Payne Subject: ADMIN: For those with 61-79 trucks This message will appear periodically over the next month until our new list information is updated on the various sites we're listed on. For those who recently subscribed to this list: This list is for discussion of 1960 and older Ford trucks. If you have a 1961-1979 Ford truck please notify me via email (kpayne and I'll switch you over to the appropriate list. Let me know if you want the digest or live list. We recently split the 1979 and older truck list into two groups. fordtrucks fordtrucks61-79 Please note that you may choose to remain on this list in addition to being added to the 1961-1979 list. We now return you to our regularly scheduled program.... - -Ken FTU Admin ------------------------------ Date: Sun, 28 Sep 1997 20:23:02 -0500 From: Jay Phillips Subject: 1953 F-1 Flatheads Forever! My 53 F-1 needs a new cargo bed, and I need information concerning length and width of lumber needed. Also will appreciate any hints on best place, NOS supplier or commerical truck/trailer shop, to obtain metal hold down strips that seperate the boards.Any help will be appericated.. ------------------------------ Date: Sun, 28 Sep 1997 23:51:54 -0400 From: "Don & Teresa Neighbors" Subject: Tire Pressure I hate to ask such an elemental question, but what should be the air pressure in those 16" retreads my '54 F250 is sporting? I haven't driven anything with tires this big in nearly 20 years!! The only clue i have is the maximum load Don Neighbors .... To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts
Registration is free, easy and gives you access to more features.
If you are already logged in and are seeing this message, your web browser is blocking session
cookies. Change your browser cookie settings to allow session cookies.
Advertising -
Terms of Use - Privacy Policy -
Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.
|