Please do not repost, forward or otherwise publish messages
contained in these archives without consent from the respective
author(s). These archives may not, in whole or part, be stored on
any public retrieval system (FTP, web, gopher, newsgroup, etc.) by
individuals or companies, without consent of the respective authors.

Received: with LISTAR (v0.128a; list pre61-list); Mon, 07 Feb 2000 14:25:33 -0500 (EST)
Date: Mon, 07 Feb 2000 14:25:33 -0500 (EST)
From: Ford Truck Enthusiasts List Server ford-trucks.com>
To: pre61-list digest users ford-trucks.com>
Reply-to: pre61-list ford-trucks.com
Subject: pre61-list Digest V1 #2002
Precedence: bulk

==========================================================
Ford Truck Enthusiasts 1948-1960 Truck Mailing List

Visit our web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe pre61-list" in the subject of the
message.
==========================================================

------------------------------------
pre61-list Digest Sun, 06 Feb 2000 Volume: 01 Issue: 2002

In This Issue:
Looking for correct site
Re: Looking for correct site
Re: VIN # Plate Question
Re: Looking for correct site
ADMIN: Posting notes
Re: F-2 tail gate
Re: F-2 tail gate
Re: F-2 tail gate
Re: F-2 tail gate
Re: F-2 tail gate
Re: posting notes
Re: F-2 tail gate
Re: F-2 tail gate
Re: F-2 tail gate

----------------------------------------------------------------------

From: elmo56 webtv.net (Carl Krueger)
Date: Sun, 6 Feb 2000 17:04:08 -0600 (CST)
Subject: Looking for correct site

I know that this is not the correct list to post this on. but I am
hoping someone can direct me to the proper site.
I am looking for a windshield and window hardware for the drivers side
door for my '67 Mustang. Any help would be greatly appreciated.
The Wife of above.


------------------------------

Date: Sun, 06 Feb 2000 18:24:52 -0500
From: Ken Payne ford-trucks.com>
Subject: Re: Looking for correct site

At 05:04 PM 2/6/00 -0600, you wrote:
>I know that this is not the correct list to post this on. but I am
>hoping someone can direct me to the proper site.
>I am looking for a windshield and window hardware for the drivers side
>door for my '67 Mustang. Any help would be greatly appreciated.
>The Wife of above.

Go to the links section of the site and then to the Ford vehicles
section. You'll find Fordnatics listed. They have a huge list
with tons of Mustang owners.

Ken



------------------------------

From: JRFiero aol.com
Date: Sun, 6 Feb 2000 19:07:40 EST
Subject: Re: VIN # Plate Question

In a message dated 2/5/2000 3:03:34 PM Eastern Standard Time, LSTYR88 aol.com
writes:

> Does anyone know how or know where I can find some info on how to decode my
> VIN # on my 55 F-100
> Also, does anyone remanufacture or remake VIN plates?
Post the numbers, several of us have the books.
I picked up a business card at Carlisle for someone who makes the plates.
Card reads DATA PLATES SHOW QUALITY Lincoln Ford Thunderbird Mercury
Edsel Meteor Many G.M. Mopar Orhans also. Send Make, Model for Details.
A.G. Backeast, P.O.Box 581, Plainville, CT 06062 860-747-2942.

------------------------------

Date: Sun, 06 Feb 2000 19:31:38 -0500
From: "Thomas J. Teixeira" world.std.com>
Subject: Re: Looking for correct site

At 06:24 PM 02/06/2000 -0500, Ken Payne wrote:
>Go to the links section of the site and then to the Ford vehicles
>section. You'll find Fordnatics listed. They have a huge list
>with tons of Mustang owners.

A place to look is http://www.ford-trucks.com//lc/lc.php?action=do&link=http://antler.moose.to/~server/cm. This is an e-mail
list devoted to classic Mustangs.

Tom Teixeira '35 pickup http://www.ford-trucks.com//lc/lc.php?action=do&link=http://world.std.com/~tjt/35Pickup.html


------------------------------

Date: Sun, 06 Feb 2000 22:17:24 -0500
From: Ken Payne ford-trucks.com>
Subject: ADMIN: Posting notes

Just a note to everyone.... some of you are really going
to like this. Listar, our new mailing server, enforces
quoting limits. No longer will you be able to quote a
50 line posting with a one line response. You'll receive
an error email if you do.

Ken Payne
Ford Truck Enthusiasts



------------------------------

From: "Robert Jones" pmihwy.com>
Subject: Re: F-2 tail gate
Date: Tue, 1 Feb 2000 04:34:57 -0600

The tailgate for the F-2 is wider and taller than the F-1.


------------------------------

From: DEADOAK aol.com
Date: Mon, 7 Feb 2000 07:42:40 EST
Subject: Re: F-2 tail gate

None of my parts books list tailgates for anything other than F1's. where
can I get one for F2?

Thanks

Charles

------------------------------

Date: Mon, 7 Feb 2000 05:50:59 -0800 (PST)
From: Ed Ellston yahoo.com>
Subject: Re: F-2 tail gate

Charles:

Perhaps it would be a good idea to take some
measurements of the tail gate or tail gate opening and
compare them to the measurements of an F-1. I haven't
seen any for an F-2 and that is probably because the
F-1 is a more popular model for restoration.

Ed and his Effie

--- DEADOAK aol.com wrote:
> None of my parts books list tailgates for anything
> other than F1's. where
> can I get one for F2?
>
> Thanks
>
> Charles
>
==========================================================
> To unsubscribe, send email to:
> listar ford-trucks.com with
> the words "unsubscribe pre61-list" in the body
> of the
> message.
>
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://im.yahoo.com

------------------------------

From: Fordf3 aol.com
Date: Mon, 7 Feb 2000 09:48:42 EST
Subject: Re: F-2 tail gate

The F-2 and 3 tailgates are the same.They are hard to come by but they are
out there.
Ed Reiner
Drexel Hill Pa
48 F-3

------------------------------

From: DEADOAK aol.com
Date: Mon, 7 Feb 2000 09:59:36 EST
Subject: Re: F-2 tail gate

Ed;

Thanks, sounds like a good idea since I'm getting conflicting stories about
the size of an F2.

Charles

------------------------------

From: jniolon uss.com
Date: Mon, 07 Feb 2000 09:09:29 -0600
Subject: Re: posting notes



...."No longer will you be able to quote a
50 line posting with a one line response. You'll receive
an error email if you do."

THANK YOU !!! THANK YOU !!! THANK YOU !!!




------------------------------

From: Fordf3 aol.com
Date: Mon, 7 Feb 2000 11:05:55 EST
Subject: Re: F-2 tail gate

Try 1/2 ton fun
908 928 9421
They are in Jacksonville NJ
Ed

------------------------------

From: DEADOAK aol.com
Date: Mon, 7 Feb 2000 11:09:01 EST
Subject: Re: F-2 tail gate

Thank you Ed for the information

Charles

------------------------------

Date: Mon, 7 Feb 2000 10:05:19 -0800 (PST)
From: Ed Ellston yahoo.com>
Subject: Re: F-2 tail gate

Anytime, Charles, anytime.

--- DEADOAK aol.com wrote:
> Thank you Ed for the information
>
> Charles
>
==========================================================
> To unsubscribe, send email to:
> listar ford-trucks.com with
> the words "unsubscribe pre61-list" in the body
> of the
> message.
>
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://im.yahoo.com

------------------------------

End of pre61-list Digest V1 #2002
*********************************
----------------------------------------------------------
Ford Truck Enthusiasts 1948-1960 Truck List....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.