From: owner-pre48-list-digest ford-trucks.com (pre48-list-digest)
To: pre48-list-digest ford-trucks.com
Subject: pre48-list-digest V2 #69
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre48-list-digest ford-trucks.com
Errors-To: owner-pre48-list-digest ford-trucks.com
Precedence: bulk


pre48-list-digest Tuesday, August 3 1999 Volume 02 : Number 069



=======================================================================
Ford Truck Enthusiasts - 1947 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre47-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre48 - steering box
Re: FTE Pre48 - 46 front fenders
Re: FTE Pre48 - 46 front fenders
Re: FTE Pre48 - 46 front fenders
Re: FTE Pre48 - 46 front fenders
Re: FTE Pre48 - 46 front fenders

=======================================================================

----------------------------------------------------------------------

Date: Mon, 02 Aug 1999 08:37:27 -0500
From: Chris Chambers
Subject: FTE Pre48 - steering box

Hey guys,
Can anyone give me some information on how to disassemble the steering
box on my 46 1/2 ton. I am trying to get the motor and trans pulled
out. The pan underneath needs to come out and I am trying to remove it
without cutting it. The exhaust runs through a hole on one side and the
steering arm on the other. Can I break the steering assembly down so it
will slide through the hole in the pan? Any help would be appreciated.
- -Chris

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Mon, 02 Aug 1999 13:37:12 -0500
From: "Jon F. Grossardt"
Subject: Re: FTE Pre48 - 46 front fenders

Gary,

I have the front grill section but all of the grill bars have been taken off
and sold. Sorry!

Jon Grossardt

GILASAILR aol.com wrote:

> Jon, Have asked you about 47 grille bars???
> I am in need of a very good set to complete the 'parts rodeo' on my panel
> truck.
> Please advise. Thanks in advance.
>
> Gary Oberbeck
> 47 1/2t panel
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

- --
MZÁ


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Mon, 02 Aug 1999 13:52:24 -0500
From: Chris Chambers
Subject: Re: FTE Pre48 - 46 front fenders

Gary, I also have the grille section, I still have the bars but a few are bent
inward. Dennis Carpenter has these bars in metal and stainless steel. I toured
his faciltiy in April and the place is top notch. Many of his parts are
licensed by Ford. Let me know if you need his number and I will dig the catalog
out at the house.
- -Chris

"Jon F. Grossardt" wrote:

> Gary,
>
> I have the front grill section but all of the grill bars have been taken off
> and sold. Sorry!
>
> Jon Grossardt
>
> GILASAILR aol.com wrote:
>
> > Jon, Have asked you about 47 grille bars???
> > I am in need of a very good set to complete the 'parts rodeo' on my panel
> > truck.
> > Please advise. Thanks in advance.
> >
> > Gary Oberbeck
> > 47 1/2t panel
> > == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html
>
> --
> MZÁ
>
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 3 Aug 1999 00:46:56 EDT
From: GILASAILR aol.com
Subject: Re: FTE Pre48 - 46 front fenders


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 3 Aug 1999 00:47:53 EDT
From: GILASAILR aol.com
Subject: Re: FTE Pre48 - 46 front fenders

John, Thanks for the reply.
Gary Oberbeck.
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 3 Aug 1999 00:49:13 EDT
From: GILASAILR aol.com
Subject: Re: FTE Pre48 - 46 front fenders

Chris, Thanks for the reply I'll check out DC Repro's.
Gary Oberbeck
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre48-list-digest V2 #69
*******************************

+- Ford Truck Enthusiasts - 1947 and Older trucks and vans -----------+....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.