Received: with LISTAR (v0.129a; list perf-list); Sat, 09 Sep 2000 19:31:48 -0400 (EDT)
Date: Sat, 09 Sep 2000 19:31:48 -0400 (EDT)
From: Ford Truck Enthusiasts List Server <listar ford-trucks.com>
To: perf-list digest users <listar ford-trucks.com>
Reply-to: perf-list ford-trucks.com
Subject: perf-list Digest V2000 #139
Precedence: list

==========================================================
Ford Truck  Enthusiasts  Performance,  Hot-Rod  and Custom
Truck Mailing List

Visit our  web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe perf-list" in  the subject  of  the
message.
==========================================================

------------------------------------
perf-list Digest Thu, 07 Sep 2000 Volume: 2000  Issue: 139

In This Issue:
Ford in talks with Goodyear to supply Explorer tires
ADMIN: Ford CEO Jac Nasser announces safety initiatives du
BRIDGESTONE BLUES
Subscription to forum at http://www.ford-trucks.com/cgi-bi

----------------------------------------------------------------------

From: william.hickey bankofamerica.com
Date: Thu, 07 Sep 2000 16:43:56 -0400
Subject: Ford in talks with Goodyear to supply Explorer tires



Good News !!!!

Ford in talks with Goodyear to supply Explorer tires
                               Ford Motor is talking with Goodyear Tire &
Rubber about supplying tires for
                               its 2002 Explorer sport utility vehicle. Current
Explorer models are solely
                               equipped by Firestone.

                               "We are in talks with Goodyear. We haven't made
any final decisions yet,"
                               Ford spokesman Frank Sopata said, declining
further comment. The
                               Ford-Goodyear talks increase pressure on
Firestone, which was blasted
                               along with Ford in Congressional hearings
Wednesday. U.S. lawmakers said
                               the companies and the National Highway Traffic
Safety Administration did
                               not act quickly enough to initiate Firestone's
recall of 6.5 million 15-inch tires.
                               Most of the tires are on Ford vehicles,
particularly the Explorer.
                               SOURCE: Reuters, 09.07



------------------------------

Date: Thu, 07 Sep 2000 18:19:53 -0400
From: Ken Payne <kpayne ford-trucks.com>
Subject: ADMIN: Ford CEO Jac Nasser announces safety initiatives du

Sept. 6 - Ford CEO Jac Nasser announces safety initiatives
during congressional testimony.

Press release is linked off the main page of our site.

Ken Payne
Admin, Ford Truck Enthusiasts
http://www.ford-trucks.com


------------------------------

From: william.hickey bankofamerica.com
Date: Fri, 08 Sep 2000 09:02:22 -0400
Subject: BRIDGESTONE BLUES




BRIDGESTONE BLUES. Oh, those troubled waters at
Bridgestone. The U.S. Justice Department is looking into
whether a criminal investigation into Bridgestone Corp.'s
[JP] handling of a recall of tires on Ford Motor  [F]
vehicles is warranted. Attorney General Janet Reno said
that an Aug. 28 letter from Vermont Senator Patrick Leahy
had prompted the decision to study whether any civil or
criminal laws had been violated.



------------------------------

Date: Sat, 9 Sep 2000 19:31:35 -0400
From: admin ford-trucks.com
Subject: Subscription to forum at http://www.ford-trucks.com/cgi-bi


Following are new messages posted in the Ford Truck
Enthusiasts message board forums.  If you have any
questions, please use the contact form on the web site.

To remove your subscription, visit our Message Board at
www.ford-trucks.com, login, view any forum and click the
subscription link.  If you are subscribed to any of our
mailing lists, you receive this message automatically
as part of that subscription and it can only be disabled
by unsubscribing from the mailing list.
Messages posted in Computer Chips
===========================================================
"Performance Chip question"
Posted by trvaughn on 09/08/2000 10:21:10
http://www.ford-trucks.com/dcforum/chips/36.html#0

"Chip for 87 F150"
Posted by D on 09/08/2000 13:32:02
http://www.ford-trucks.com/dcforum/chips/36.html#1

Messages posted in Performance, Hot-Rodding and General Engine Building
===========================================================
"Roller cam for 91 5.0?"
Posted by hotrodford_88 on 09/07/2000 21:32:09
http://www.ford-trucks.com/dcforum/perf/293.html#0

"RE: Timing Computers"
Posted by rocky50 on 09/07/2000 23:34:51
http://www.ford-trucks.com/dcforum/perf/289.html#2

"RE: Edelbrock carb ?"
Posted by CantDrive55 on 09/08/2000 00:45:28
http://www.ford-trucks.com/dcforum/perf/275.html#7

"roller blocks"
Posted by lvstang on 09/08/2000 01:13:20
http://www.ford-trucks.com/dcforum/perf/293.html#1

"RE: Edelbrock carb ?"
Posted by johnboy on 09/08/2000 09:51:10
http://www.ford-trucks.com/dcforum/perf/275.html#8

"RE: Timing Computers"
Posted by slikness on 09/08/2000 14:31:56
http://www.ford-trucks.com/dcforum/perf/289.html#3

"FE C8OE-6090-N HEADS"
Posted by bigal72 on 09/08/2000 23:21:40
http://www.ford-trucks.com/dcforum/perf/294.html#0

Messages posted in 332/352/360/361/390/391/406/410/427/428 FE big block
===========================================================
"RE: I bet Mr. F is getting tired of FE code questions."
Posted by proeliator on 09/07/2000 15:33:13
http://www.ford-trucks.com/dcforum/DCForumID7/26.html#4

"Upside down 352 on FE block"
Posted by proeliator on 09/07/2000 16:36:02
http://www.ford-trucks.com/dcforum/DCForumID7/27.html#0

"1972 f250 4x4 360"
Posted by usmcdi on 09/07/2000 16:43:50
http://www.ford-trucks.com/dcforum/DCForumID7/28.html#0

"RE: 1972 f250 4x4 360"
Posted by proeliator on 09/07/2000 20:54:41
http://www.ford-trucks.com/dcforum/DCForumID7/28.html#1

"RE: 390 or 391 Whats the difference"
Posted by proeliator on 09/07/2000 21:39:15
http://www.ford-trucks.com/dcforum/DCForumID7/7.html#12

"FE CYLINDER HEAD INFO"
Posted by bigal72 on 09/08/2000 19:24:15
http://www.ford-trucks.com/dcforum/DCForumID7/29.html#0

"410 Pistons"
Posted by Like M. Fords on 09/08/2000 22:44:21
http://www.ford-trucks.com/dcforum/DCForumID7/25.html#3

"RE: I bet Mr. F is getting tired of FE code questions."
Posted by 69f250w428 on 09/09/2000 06:30:40
http://www.ford-trucks.com/dcforum/DCForumID7/26.html#5

"RE: FE CYLINDER HEAD INFO"
Posted by dinosaurfan on 09/09/2000 11:38:48
http://www.ford-trucks.com/dcforum/DCForumID7/29.html#1

"RE: FE CYLINDER HEAD INFO"
Posted by bigal72 on 09/09/2000 12:53:51
http://www.ford-trucks.com/dcforum/DCForumID7/29.html#2

Messages posted in Inline Six
===========================================================
"F250 Ignition Problem - tough one!"
Posted by carlos57 on 09/08/2000 11:03:27
http://www.ford-trucks.com/dcforum/DCForumID9/120.html#0

"RE: F250 Ignition Problem - tough one!"
Posted by Paul on 09/08/2000 11:37:35
http://www.ford-trucks.com/dcforum/DCForumID9/120.html#1

"RE: timing"
Posted by walterdanek on 09/08/2000 12:41:29
http://www.ford-trucks.com/dcforum/DCForumID9/87.html#5

"RE: A little black smoke, kinda wierd..."
Posted by steakman_usaf on 09/08/2000 12:50:44
http://www.ford-trucks.com/dcforum/DCForumID9/118.html#4

"RE: F250 Ignition Problem - tough one!"
Posted by carlos57 on 09/08/2000 13:24:53
http://www.ford-trucks.com/dcforum/DCForumID9/120.html#2

"Carburator problem?"
Posted by warthog299 on 09/08/2000 19:31:24
http://www.ford-trucks.com/dcforum/DCForumID9/121.html#0

"RE: Carburator problem?"
Posted by carlos57 on 09/08/2000 21:19:21
http://www.ford-trucks.com/dcforum/DCForumID9/121.html#1

"RE: F250 Ignition Problem - tough one!"
Posted by carlos57 on 09/08/2000 22:02:52
http://www.ford-trucks.com/dcforum/DCForumID9/120.html#3

"RE: F250 Ignition Problem - tough one!"
Posted by Paul on 09/09/2000 00:25:01
http://www.ford-trucks.com/dcforum/DCForumID9/120.html#4

"2bbl intake for 300 I6"
Posted by bigredf150 on 09/09/2000 17:42:38
http://www.ford-trucks.com/dcforum/DCForumID9/122.html#0

"six cylinder performance "
Posted by billyb on 09/09/2000 18:18:30
http://www.ford-trucks.com/dcforum/DCForumID9/122.html#1

"2 bl carbs"
Posted by rlbertrand on 09/09/2000 19:15:47
http://www.ford-trucks.com/dcforum/DCForumID9/122.html#2

Messages posted in 385 Series - 370/385/429/460 big blocks
===========================================================
"RE: Early 460 - Nylon timing gear?"
Posted by Steve_Uzi on 09/09/2000 12:08:26
http://www.ford-trucks.com/dcforum/DCForumID11/88.html#1

"RE: valve heads"
Posted by Steve_Uzi on 09/09/2000 12:12:40
http://www.ford-trucks.com/dcforum/DCForumID11/86.html#2

Messages posted in 351M/400
===========================================================
"RE: Oil pressure switch/sending unit"
Posted by bill_beyer on 09/07/2000 22:07:20
http://www.ford-trucks.com/dcforum/DCForumID12/71.html#1

"Fantastic 400"
Posted by boon0022 on 09/08/2000 11:51:28
http://www.ford-trucks.com/dcforum/DCForumID12/69.html#8

"RE: What do your 400's run like?"
Posted by fordmando on 09/08/2000 15:44:59
http://www.ford-trucks.com/dcforum/DCForumID12/69.html#9

"Mileage"
Posted by fordmando on 09/08/2000 15:52:16
http://www.ford-trucks.com/dcforum/DCForumID12/69.html#10

"RE: 400 Heads"
Posted by bill_beyer on 09/09/2000 12:17:27
http://www.ford-trucks.com/dcforum/DCForumID12/67.html#2

"RE: 400 pistons"
Posted by bill_beyer on 09/09/2000 12:19:29
http://www.ford-trucks.com/dcforum/DCForumID12/61.html#1

"RE: 400m horsepower"
Posted by bill_beyer on 09/09/2000 15:11:57
http://www.ford-trucks.com/dcforum/DCForumID12/51.html#2

"RE: 400's"
Posted by bill_beyer on 09/09/2000 15:18:35
http://www.ford-trucks.com/dcforum/DCForumID12/3.html#20

"RE: Chucky P Tell me more "
Posted by bill_beyer on 09/09/2000 15:22:19
http://www.ford-trucks.com/dcforum/DCForumID12/3.html#21

"RE: 351M head questions"
Posted by bill_beyer on 09/09/2000 15:29:15
http://www.ford-trucks.com/dcforum/DCForumID12/22.html#4

"RE: Chucky P Tell me more "
Posted by infieldg on 09/09/2000 19:40:26
http://www.ford-trucks.com/dcforum/DCForumID12/3.html#22

Messages posted in 221/260/289/302/351w V8
===========================================================
"RE: setting valves"
Posted by lurch on 09/07/2000 18:30:18
http://www.ford-trucks.com/dcforum/DCForumID18/122.html#6

"RE: 302 Water Pump Removal"
Posted by nitro94 on 09/07/2000 23:34:40
http://www.ford-trucks.com/dcforum/DCForumID18/102.html#15

"RE: setting valves"
Posted by lvstang on 09/08/2000 01:22:35
http://www.ford-trucks.com/dcforum/DCForumID18/122.html#7

"RE: 302 Water Pump Removal"
Posted by jlittle_46 on 09/08/2000 09:10:22
http://www.ford-trucks.com/dcforum/DCForumID18/102.html#16

"RE: 302 Water Pump Removal"
Posted by nitro94 on 09/08/2000 22:28:02
http://www.ford-trucks.com/dcforum/DCForumID18/102.html#17

"RE: setting valves"
Posted by lurch on 09/08/2000 22:39:58
http://www.ford-trucks.com/dcforum/DCForumID18/122.html#8

"351W questions"
Posted by loudfords on 09/08/2000 22:54:54
http://www.ford-trucks.com/dcforum/DCForumID18/126.html#0

"RE: 302 Water Pump Removal"
Posted by jlittle_46 on 09/09/2000 09:51:44
http://www.ford-trucks.com/dcforum/DCForumID18/102.html#18

"RE: 302 Water Pump Removal"
Posted by jlittle_46 on 09/09/2000 09:52:45
http://www.ford-trucks.com/dcforum/DCForumID18/102.html#19



------------------------------

End of perf-list Digest V2000 #139
**********************************
----------------------------------------------------------
Ford Truck Enthusiasts  Performance,  Hot-Rod  and  Custom ....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.