From: owner-perf-list-digest ford-trucks.com (perf-list-digest)
To: perf-list-digest ford-trucks.com
Subject: perf-list-digest V2 #318
Reply-To: perf-list ford-trucks.com
Sender: owner-perf-list-digest ford-trucks.com
Errors-To: owner-perf-list-digest ford-trucks.com
Precedence: bulk


perf-list-digest Sunday, December 12 1999 Volume 02 : Number 318



=======================================================================
Ford Truck Enthusiasts - Performance
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe perf-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Perf - Electronic trany
FTE Perf - ADMIN: Charity Event
Re: FTE Perf - rebuilding the c6.....
Re: FTE Perf - rebuilding the c6.....
Re: FTE Perf - rebuilding the c6.....
FTE Perf - ADMIN: FTE Anniversary
Re: FTE Perf - rebuilding the c6.....
Re: FTE Perf - rebuilding the c6.....
Re: FTE Perf - rebuilding the c6.....
Re: FTE Perf - rebuilding the c6.....
FTE Perf - Early heads late engine

=======================================================================

----------------------------------------------------------------------

Date: Sat, 11 Dec 1999 08:04:57 -0600
From: "Douglas W McLaughlin"
Subject: FTE Perf - Electronic trany

I recently bought a 53 F100 with a 3.8 motor and trany from a 88 T-bird. I
don't know who the guy is that installed it (several owners ago) but he
didn't have any luck installing the digital instrument cluster. the only
thing that works is the fuel gage. I want to take it all out and install a
set of VDO or Autometer gauges. Does anyone know if an electronic speedo or
mechanical speedo from these companies will work? Does the stock T-bird
trany have a gear for a mech.speedo?

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 10:48:14 -0500
From: Ken Payne
Subject: FTE Perf - ADMIN: Charity Event

Well, its that time of year again. Ford Truck Enthusiasts
would like to use the power of all our list members to
help someone in need during this time of year. If you
know someone in dire straits, whether they are a list
member or not, please email me (off the list to keep the
traffic down) at kpayne ford-trucks.com.

I'll present all the charity submissions on Sunday on the
website, minus names, and we'll vote on who we want to
support. Last year, we raised about $750 in two weeks
for a very worthy cause. This year, I'm sure we can do
even more. Together, we have great strength.

Regards,
Ken Payne
Admin, Ford Truck Enthusiasts


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 22:10:16 EST
From: Bogginf350 AOL.COM
Subject: Re: FTE Perf - rebuilding the c6.....

Ok after totally rebuilding a C6 in a 79 3/4 ton 4x4... with a tci pro super
kit and a cheetah full manual shift reverse pattern valve body i have came
upon one problem. One left over part..... this part is not in the exploded
views of the parts diagrams and is not listed in the two differnt manuals..
it is a small plastic valve. anyone have a clue???


thanks,
josh davis
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 22:52:30 -0500
From: "Brad Smith"
Subject: Re: FTE Perf - rebuilding the c6.....

- ----- Original Message -----
From:
To:
Sent: Saturday, December 11, 1999 10:10 PM
Subject: Re: FTE Perf - rebuilding the c6.....


> Ok after totally rebuilding a C6 in a 79 3/4 ton 4x4... with a tci pro
super
> kit and a cheetah full manual shift reverse pattern valve body i have came
> upon one problem. One left over part..... this part is not in the exploded
> views of the parts diagrams and is not listed in the two differnt
manuals..
> it is a small plastic valve. anyone have a clue???
>
>
> thanks,
> josh davis
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

Small plastic valve.. Could be the pressure Valve that goes under the filter
screen... Filter screen then spring then valve... What exactly does it look
like, because I know that some of the later model C6's used flutter valves
in the valve body (Actually called them pucks). These were just flat pieces
of rubber, worked similarly to the check balls in the valve body... If this
is what you have a good Check ball book from ATSG will help you solve your
problem.


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 23:05:05 EST
From: Bogginf350 AOL.COM
Subject: Re: FTE Perf - rebuilding the c6.....

thanks for the response brad, it was one of the first parts i removed before
the rebuild.. im wokring 72 hours a week and have had limited time to do this
and has been strung out over a week. it has a fiber brownish color. a shaft
about 3/16 inch wide and 1 1/2 long. on the end of the shaft it has a larger
bell looking front with a O ring seal.....
let me know.. if you can recognize this.. its driving me nots
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 23:31:14 -0500
From: Ken Payne
Subject: FTE Perf - ADMIN: FTE Anniversary

FTE will soon be celebrating another anniversary. Please feel
free to share any fond memories of our past with me, what you
like best about FTE or its users, etc. I'm putting together
a "perspective" article and would like to include items from
the users, who after all, make FTE the community it is.

Everyone is welcome to contribute, whether you are a new
member or you've been here from the beginning. Send anything
you'd like to submit to me personally.

Thanks,
Ken Payne
Admin, Ford Truck Enthusiasts


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 23:45:59 -0500
From: "Brad Smith"
Subject: Re: FTE Perf - rebuilding the c6.....

- ----- Original Message -----
From:
To:
Sent: Saturday, December 11, 1999 11:05 PM
Subject: Re: FTE Perf - rebuilding the c6.....


> thanks for the response brad, it was one of the first parts i removed
before
> the rebuild.. im wokring 72 hours a week and have had limited time to do
this
> and has been strung out over a week. it has a fiber brownish color. a
shaft
> about 3/16 inch wide and 1 1/2 long. on the end of the shaft it has a
larger
> bell looking front with a O ring seal.....
> let me know.. if you can recognize this.. its driving me nots
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

Are you sure that you put the throttle valve back in... That is what it
sounds like you are describing... It goes into the casing of the tranny, and
then the throttle valve rod, and then the vacuum controlled modulator screws
into the back and into the TV rod.... Hope that helps, if not email me back
and I'll keep racking my brain

Brad

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 23:50:01 EST
From: Bogginf350 AOL.COM
Subject: Re: FTE Perf - rebuilding the c6.....

where is it located in the casing? my modulator has a hold down not screwed
in. Im sure i pulle dit out of the casing but im just not sure where...
josh
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sun, 12 Dec 1999 00:04:32 -0500
From: "Brad Smith"
Subject: Re: FTE Perf - rebuilding the c6.....

- ----- Original Message -----
From:
To:
Sent: Saturday, December 11, 1999 11:50 PM
Subject: Re: FTE Perf - rebuilding the c6.....


> where is it located in the casing? my modulator has a hold down not
screwed
> in. Im sure i pulle dit out of the casing but im just not sure where...
> josh
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

Ok, where the modulator goes into the casing, there is a rod that actually
goes into the modulator, this is the throttle valve rod, and on the other
end of that rod (not connected) that is the throttle valve. One end of this
valve should be cupped (or belled as you described it) to accept the rod...

Brad


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sun, 12 Dec 1999 00:12:44 EST
From: Bogginf350 AOL.COM
Subject: Re: FTE Perf - rebuilding the c6.....

ok i got ya brad, yes that steel valve is in. this is just a thin plastic
piece its got a thinner cylindrical shaft about 3/16" then goes to a larger
round part about3/4 inch diameter with a o ring in the groove. and then it
rounds off.. its really weird
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 11 Dec 1999 23:47:31 -0800
From: Dan Laray
Subject: FTE Perf - Early heads late engine

Will early 69-70 windsor heads bolt straight up on a 80's 351 ? Assuming
that it is not a high lift cam are the dished pistons and stock reliefs
enough so that there will be no valve banging? Thanks
Dan

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.