From: owner-perf-list-digest ford-trucks.com (perf-list-digest)
To: perf-list-digest ford-trucks.com
Subject: perf-list-digest V2 #305
Reply-To: perf-list ford-trucks.com
Sender: owner-perf-list-digest ford-trucks.com
Errors-To: owner-perf-list-digest ford-trucks.com
Precedence: bulk


perf-list-digest Friday, November 26 1999 Volume 02 : Number 305



=======================================================================
Ford Truck Enthusiasts - Performance
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe perf-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Perf - replacement stepside fenders for 77-79
FTE Perf - FTE offroad - repalcement stepside fenders for 77-79 trucks
Re: FTE Perf - replacement stepside fenders for 77-79
FTE Perf - Happy Turkey Day
FTE Perf - Hello and Happy Turkey day

=======================================================================

----------------------------------------------------------------------

Date: Thu, 25 Nov 1999 11:44:49 EST
From: Bogginf350 AOL.COM
Subject: FTE Perf - replacement stepside fenders for 77-79

Anyone know of a manufacturer that sells either steel or fiberglass
replacement steps and fenders for the older fords? I would appreciate any
info I can get.
thank you,
josh davis
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 25 Nov 1999 11:46:49 EST
From: Bogginf350 AOL.COM
Subject: FTE Perf - FTE offroad - repalcement stepside fenders for 77-79 trucks

Anyone know of a manufacturer that sells either steel or fiberglass
replacement steps and fenders for the older fords? I would appreciate any
info I can get.
thank you,
josh davis
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 25 Nov 1999 09:02:00 -0800
From: George Miller
Subject: Re: FTE Perf - replacement stepside fenders for 77-79

JC Whitney lists most of the sheet metal for '73 up models. Don't know
what the quality is but I've had good luck with their door seals and a
convertible top, OEM quality. I've also seen ads for sheet metal in most
of the mags.

George Miller

Bogginf350 AOL.COM wrote:
>
> Anyone know of a manufacturer that sells either steel or fiberglass
> replacement steps and fenders for the older fords? I would appreciate any
> info I can get.
> thank you,
> josh davis
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 25 Nov 1999 10:49:02 -0800
From: "Bill Beyer"
Subject: FTE Perf - Happy Turkey Day

To all of the ladies and gentlemen on the FTE lists, have a happy & safe
Thanksgiving and remember that it's OK to get a little grease under your
fingernails today as long as you clean it up before you carve the bird.

Be well,

Bill Beyer

"If you can't dazzle them with brilliance, riddle them with bullets"



== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 25 Nov 1999 20:28:07 EST
From: JUMPINFORD AOL.COM
Subject: FTE Perf - Hello and Happy Turkey day

Hello everybody

Its been quite awhile since Ive writtin, so I figured Id let yall know me and
Tweety are still around. (With my reputation, Im sure a few of you figured
me for a rollover) I assure you I am alive and well, as is Tweety. Im up to
almost 500 miles on a shattered piston. With any luck the ol girl will
continue running till my new motor is up and running. Should have the new
motor come the end of December. And I tell ya, I got a helluva deal. I was
down visiting my machinist, tellin him I was gonna be bringing down a 460 to
have him build, well he told me he already had a shortblock built. Said hed
take 1000 for it. I asked for more details, and I was impressed, but not
cinched yet. The specs on the shortblock are as follows: .030 block,
balanced with hypertectic pistons, any cam of my choosing (which is the comp
268h with lifters) and a dyna gear HV oil pump. I didnt think that was too
bad, so I asked him if he had any interceptor heads. He said he wasnt sure,
but pointed me at his collection of 429/460 heads and let me have a look.
Well it wasnt 5 min and I found a pair, magnafluxed and ready to build, so I
said "How much?"
His reply blew me away, "$400 and I will build em to match the cam" I
immediately said Id take it, and went to the bank to pull out a deposit. I
laid $500 on it right away, and am payin the rest (1400, plus tax) on a
layaway basis. Should have it paid off shortly. I tell ya I cant wait.
Tweety is gonna be one of the fastest one ton trucks around. Ive already got
the carb, a holley 750 DP. I'll be installing an offroad kit and the
metering plate setup for easier tuning. All in all, it should run great, And
I'll be sure and let yall know.
Have a good one, I'll see ya out there

Darrell Duggan
74 F-350 "Tweety"
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of perf-list-digest V2 #305
*******************************

+--------------- Ford Truck Enthusiasts - Performance ----------------+
| Send posts to perf-list....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.