Please do not repost, forward or otherwise publish messages
contained in these archives without consent from the respective
author(s). These archives may not, in whole or part, be stored on
any public retrieval system (FTP, web, gopher, newsgroup, etc.) by
individuals or companies, without consent of the respective authors.

Received: with LISTAR (v0.128a; list offroad-list); Thu, 17 Feb 2000 17:39:13 -0500 (EST)
Date: Thu, 17 Feb 2000 17:39:13 -0500 (EST)
From: Ford Truck Enthusiasts List Server ford-trucks.com>
To: offroad-list digest users ford-trucks.com>
Reply-to: offroad-list ford-trucks.com
Subject: offroad-list Digest V2000 #7
Precedence: bulk

==========================================================
Ford Truck Enthusiasts Offroad and 4x4 Truck Mailing List
Covering the Ranger, Explorer, Bronco 2 and Aerostar.

Visit our web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe offroad-list" in the subject of the
message.
==========================================================

------------------------------------
offroad-list Digest Wed, 16 Feb 2000 Volume: 2000 Issue: 007

In This Issue:
Re: [80-96-list] Body Lift/Front Bumper???
Re: body lift
Disk Rotors
> Re: Disk Rotors
> Re: Body Lift/Front Bumper???
Fw: 351M question
Re: Fw: 351M question
Re: Fw: 351M question
Re: Disk Rotors
> Re: Fw: 351M question
New member

----------------------------------------------------------------------

From: Greg Carter entrust.com>
Subject: Re: [80-96-list] Body Lift/Front Bumper???
Date: Wed, 16 Feb 2000 16:07:45 -0500

Hi,
Check out http://www.ford-trucks.com/articles/buildup/winch.html

For the bumper I went with, other pics of it on the main page (link below).
Bye. They made a bumper for me, which compensated for my 3" body life,
winch mount...

Greg Carter
Entrust Technologies - http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.entrust.com
http://www.ford-trucks.com/articles/buildup/dana60.html


-----Original Message-----
From: Nelson Vasconcelos [mailto:nelson150 mindspring.com]
Sent: Wednesday, February 16, 2000 3:53 PM
To: Ford Truck Enthusiasts
Subject: [80-96-list] Body Lift/Front Bumper???


Hi, I have a 1989 Ford F150 4x4 and it has a 3" body lift. The front bumper
> is still in the stock position and there is an ugly gap between the bumper
> and the body. I've been looking for brackets but no one sells them. I can
fab up some myself if I have to. Have you heard of any ideas on how to make
my own lift brackets or modify the stock ones? have you seen any front
bumpers for my truck with lift brackets and what are the prices? I like the
Smittybilt tube
bumpers and the Warn Enforcer.

Please point me in the right direction, no one else has really helped me on
this.

------------------------------

From: RobWaz316 aol.com
Date: Wed, 16 Feb 2000 16:31:08 EST
Subject: Re: body lift

Sorry Nelson, but I can't help you with the bumper relocating brackets. I
like the Warn Enforcer also. I'll see if I can find any info. I just wanted
to ask you if you put the lift on your truck? I am considering the body lift
on my truck since it is so much cheaper than suspension lifts. What did you

have to alter on your truck? I know about the fan shroud. How about the
shifter, both tranny and t-case? E- brake cables? Steering shaft? Brake
> lines? Fuel lines? Any help or advice you give would be greatly appreciated.

Rob
89 F150 4x4
5 spd

------------------------------

From: "Brad DeFore" computerlogic.com>
Subject: Disk Rotors
> Date: Wed, 16 Feb 2000 16:43:17 -0500


Hi Folks, I'm looking for advice, the rotors on my 90 F150 351 4x4 are
warped. I was going to just snatch them off and take them to get resurfaced
if they weren't to bad out. I've done this before on 2'ies with no probs of
course. When I pulled the wheel on the beast the hub is all one piece. What
all is involved in the removal and replacement of this assembly? Would ya'll
recommend replacement? or if their not to bad resurface? Pay someone else,
or try it myself? I've priced those pep guys at $145.00 (too high?). It's
only got 89,000 miles on it, but it's got the towing package with elec.
brakes and I know the po pulled his horse trailer with it on occasion. I'm
on a shoestring budget and it's a daily driver so it can't be expensive nor
take long to do. I've had it for about 18,000 miles, it averages 18mpg if I
can stay out of it. So what is the verdict ohh knowledgeable ones? Thanks
for the help in advance, I've learned a lot by listening to you guys but
still don't know enough to offer much help in return.


------------------------------

From: Eric Sneed REIL.COM>
Subject: Re: Disk Rotors
> Date: Wed, 16 Feb 2000 14:55:34 -0800

You can separate the rotor from the hub if the rotors need to be replaced.
You will need to pound out the wheel studs with a hammer and a brass drift.
This is what I did on my 89 and it was pretty easy and worked well for me.

Based upon previous experiences with this list I need to clarify that this
is just my opinion and is not to be taken as the only way to do this job.
Others on the list can probably provide a "better" way of doing this.

Eric S
-----Original Message-----
From: Brad DeFore [SMTP:bdefore computerlogic.com]
Sent: Wednesday, February 16, 2000 1:43 PM
To: offroad-list ford-trucks.com
Subject: [offroad-list] Disk Rotors
>

Hi Folks, I'm looking for advice, the rotors on my 90 F150
351 4x4 are
warped. I was going to just snatch them off and take them to get
resurfaced
if they weren't to bad out. I've done this before on 2'ies with no....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.