80-96-list-digest Saturday, July 4 1998 Volume 02 : Number 231



=======================================================================
Ford Truck Enthusiasts - 1980-1996 Trucks and Vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe 80-96-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE 80-96 - vacuum hose layouts please !?
FTE 80-96 - Key Locks/add a leaf
Re: FTE 80-96 - Key Locks/add a leaf
FTE 80-96 - a question about 1984 f150

=======================================================================

----------------------------------------------------------------------

Date: Fri, 03 Jul 98 15:12:15 -0500
From: jones.chris mail.mccg.org
Subject: FTE 80-96 - vacuum hose layouts please !?

Does anyone have any comprehensive layout of the vacuum hoses for a
late model 1986 Ford F150? I have the vacuum diagram on a sticker
underneath the hood, but it sucks. Drawings, pictures, information,
etc would be appreciated greatly. I have 3 or 4 hoses that I can't
figure out where to put. Respond to Jones.Chris MCCG.org


== FTE: Unsubscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 03 Jul 1998 14:31:20 -0800
From: Casey Vandor
Subject: FTE 80-96 - Key Locks/add a leaf

My two key locks just got here yesterday. Someone on the list bought a
set of two for $18.00 I believe it was, annyway, mine were $35.00 from
Ford. Scam city....

Larry, got a question here. How do you get the rivet out of the
leaf pack? I have dulled up two diamond bits and don't have a
sharpener. Do you have to torch it out or what?

Thanks
Casey Vandor

== FTE: Unsubscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 3 Jul 1998 19:50:24 -0400
From: "David H. Archer"
Subject: Re: FTE 80-96 - Key Locks/add a leaf

Casey,

You might try cutting the head of the rivet off with a torch, or by using a
cut off tool, and drive out the rivet with a air hammer.
It also might be a good idea to use a couple of C clamps to hold your leaf
pack together.

Dave


== FTE: Unsubscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 3 Jul 1998 20:24:50 -0500
From: "Rob Sartorius"
Subject: FTE 80-96 - a question about 1984 f150

I just boght a 1984 f-150 ext cab 351 2barrel, 2 wdr 3sp auto wa/c 3.50
rear end and have replaced the entire ignition module, cap, rotor, plugs,
had the carb rebuilt, new fuel filter yet still get terrible mileage~8
mpg.....any ideas...does this have an O2 sensor or anything like that.?

Rob
== FTE: Unsubscribe and posting info www.ford-trucks.com/faq.html

------------------------------

End of 80-96-list-digest V2 #231
********************************

+---- Ford Truck Enthusiasts - 1980 through 1996 Trucks And Vans -----+
| Send posts to 80-96-list ....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.