Please do not repost, forward or otherwise publish messages
contained in these archives without consent from the respective
author(s). These archives may not, in whole or part, be stored on
any public retrieval system (FTP, web, gopher, newsgroup, etc.) by
individuals or companies, without consent of the respective authors.

Received: with LISTAR (v0.128a; list 61-79-list); Sun, 27 Feb 2000 15:59:27 -0500 (EST)
Date: Sun, 27 Feb 2000 15:59:27 -0500 (EST)
From: Ford Truck Enthusiasts List Server ford-trucks.com>
To: 61-79-list digest users ford-trucks.com>
Reply-to: 61-79-list ford-trucks.com
Subject: 61-79-list Digest V2000 #20
Precedence: bulk

==========================================================
Ford Truck Enthusiasts 1961-1979 Truck Mailing List

Visit our web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe 61-79-list" in the subject of the
message.
==========================================================

------------------------------------
61-79-list Digest Sat, 26 Feb 2000 Volume: 2000 Issue: 020

In This Issue:
Re: Tranny Question - help!
Cam Bearings
Re: Cam Bearings
Rebuild Question
hows that
Another one wises up
ADMIN: I'm back
Re: Rebuild Question
Re: Another one wises up
Re: Tapping insanity
Re: hows that
Re: hows that
Re: hows that
ADMIN: Ford press releases
Re: hows that
Re: Rebuild Question

----------------------------------------------------------------------

From: "Hogan, Tom" kla-tencor.com>
Subject: Re: Tranny Question - help!
Date: Sat, 26 Feb 2000 11:49:27 -0800


>
> I have a nice offer on a c-6 in my area.
>
> I would be mating it to a '61 390. It is an '82.
>
> I know we just had a discussion about this, but it was too
> lengthy for me to
> put any one opinion together.
>
> What do you guys think?
>
> Should I go for it?
>
>
> Thanks,
>
> Dan
>

Dan,
I can almost (99.9%) guarantee that it won't fit. Reason being the FE motor
has a unique transmission mount flange. The C-6 was mated to the 390 but it
has an integral belhousing and can't be converted if it was mated to
anything other than an FE. The use for it would be if you have a C-6 case
on your 390 now and you take the guts out of the new one to rebuild your old
one. Or if you could use it to trade for the proper one for your app.

Sorry.

Tom H

------------------------------

From: "Christopher Worley" hotmail.com>
Subject: Cam Bearings
Date: Sat, 26 Feb 2000 16:03:31 PST

Is there some special tool out to remove and install Cam bearings.



Chris
'67 F100 352
______________________________________________________


------------------------------

From: "Erik Marquez" alaska.com>
Subject: Re: Cam Bearings
Date: Sat, 26 Feb 2000 15:29:44 -0900

Yes and sence a picture is worth a thousand words.
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.skywaytools.com/dyn.exe?doc=autogen1.dht
look at item 121
Lisle Universal Camshaft
Bearing Tool
Lisle 18000
Item #121
Price: $169.00
Shipping: $19.95


Erik Marquez
bronco78 alaska.com
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.home.gci.net/~bronco78
Home of the BB decal
-----Original Message-----
From: Christopher Worley hotmail.com>
To: 61-79-list ford-trucks.com <61-79-list ford-trucks.com>
Date: Saturday, February 26, 2000 3:04 PM
Subject: [61-79-list] Cam Bearings


>Is there some special tool out to remove and install Cam bearings.
>
>
>
>Chris
>'67 F100 352
>______________________________________________________
> >
>==========================================================
>To unsubscribe, send email to: listar ford-trucks.com with
>the words "unsubscribe 61-79-list" in the body of the
>message.
>


------------------------------

From: "Christopher Worley" hotmail.com>
Subject: Rebuild Question
Date: Sat, 26 Feb 2000 17:20:52 PST

I am rebuilding a 352 (my first rebuild) the question is: Is there any
chemical that will clean the water passages in the block, I have been using
hotwater and soap but it isn't removing it too good.



Chris
'67 F100
______________________________________________________


------------------------------

From: "david" prodigy.net>
Subject: hows that
Date: Sat, 26 Feb 2000 21:36:41 -0000


you can always tell a sniveling,mean spirited jackass by his potential for meanness to small animals and probably anything else small or weaker!HOWSTHAT!


------------------------------

Date: Sat, 26 Feb 2000 18:39:08 -0800
From: scott ford-trucks.com>
Subject: Another one wises up

A good friend of mine finally saw the light.After a life of working on
the general's junk he just bought a cherry 72 F-100 4x2 and is selling
his bl*zer and chev*lle!!!!
He wants to convert it to a 4x4.He just found a 68 or 69 F-100 4x4 that
had been flipped and wants to switch cabs etc.
I think the cabs will interchange,Anybody know for sure?

------------------------------

Date: Sat, 26 Feb 2000 20:51:23 -0500
From: Ken Payne ford-trucks.com>
Subject: ADMIN: I'm back

Hi gang. Peggy and I are back from her grandfather's funeral.
We decided that there wasn't much point in staying the entire
weekend and left a couple of hours after the funeral. He was
a very good man who's been suffering with cancer for months.

If you'll indulge me for a few sentences....

I hold in high regard anyone, regardless of their faith (ie,
Christian, Jewish, Muslim, Hindu, etc) who can follow that
faith 100%. Its something I have a very difficult time doing.
Peggy's grandfather, "Doc", was one such man who, as a country
physician, had helped countless individuals and practiced
medicine in his retirement home to the very end. Very well
loved man who had a sincere belief in his God and did his
best to help others, even to the point of being taken
advantage of. I didn't know him very long, but his death
touched me deeply. I think his dying words said it all...

"For I am now ready to be offered, and the time of my departure
is at hand. I have fought a good fight, I have finished my
course, I have kept the faith" 2 Timothy, 4:6-7

Can you imagine going out with those words? Hearing it left me
speechless.

Anyway, I have received numerous messages of condolence from
fellow FTE'rs, and rather than attempt to answer them all I'll
say here to everyone.... "thank you." I mean it sincerely and
it was nice coming home to it. I'll be taking care of FTE
administrative items and will catch up by the end of the
weekend.

Thanks,
Ken Payne
Admin, Ford Truck Enthusiasts



------------------------------

From: "Erik Marquez" alaska.com>
Subject: Re: Rebuild Question
Date: Sat, 26 Feb 2000 18:01:15 -0900

Have you had the block hot tanked? If not I would HIGHLY recommend it.
About a $40 charge at your local machine shop. After that you can get some
long brushes used to clean oil and coolant passages. try summit or Jegs.
Erik Marquez
bronco78 alaska.com
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.home.gci.net/~bronco78
Home of the BB decal
-----Original Message-----
From: Christopher Worley hotmail.com>
To: 61-79-list ford-trucks.com <61-79-list ford-trucks.com>
Date: Saturday, February 26, 2000 4:21 PM
Subject: [61-79-list] Rebuild Question


>I am rebuilding a 352 (my first rebuild) the question is: Is there any
>chemical that will clean the water passages in the block, I have been using
>hotwater and soap but it isn't removing it too good.
>
>
>
>Chris
>'67 F100
>______________________________________________________
> >
>==========================================================
>To unsubscribe, send email to: listar ford-trucks.com with
>the words "unsubscribe 61-79-list" in the body of the
>message.
>


------------------------------

Date: Sat, 26 Feb 2000 22:07:56 -0500
From: Joe & Jen DeLaurentis p3.net>
Subject: Re: Another one wises up

Scott,
yes they swap..I swapped a 68 2wd can on my 68 4x4 frame..Direct swap!!!
Joe
68 4x4 390/Auto/Dana 44 w disc brakes

scott wrote:

> A good friend of mine finally saw the light.After a life of working on
> the general's junk he just bought a cherry 72 F-100 4x2 and is selling
> his bl*zer and chev*lle!!!!
> He wants to convert it to a 4x4.He just found a 68 or 69 F-100 4x4 that
> had been flipped and wants to switch cabs etc.
> I think the cabs will interchange,Anybody know for sure?
> ==========================================================
> To unsubscribe, send email to: listar ford-trucks.com with
> the words "unsubscribe 61-79-list" in the body of the
> message.


------------------------------

From: "White Wolf" hotmail.com>
Subject: Re: Tapping insanity
Date: Sat, 26 Feb 2000 19:38:32 PST

sounds like an exhaust leak...


>From: "Kim" arn.net>

>replacing that thing is a headache because of the headers. Really a two
>person, one full day job. Anyway, replaced the starter, and the truck
>started up wonderfully, but also entertained us with a loud, consistant
>metal-to-metal tapping. Shut her down, checked oil pressure and level (on
>target), pulled the valve covers and ran her again. Plenty of oil going
>through and couldn't see anything obviously wrong, so I shut her down
>again.
>

______________________________________________________


------------------------------

Date: Sat, 26 Feb 2000 21:13:25 -0800
Subject: Re: hows that
From: Josh Keady wizzards.net>



> From: "david" prodigy.net>
> Reply-To: 61-79-list ford-trucks.com
> Date: Sat, 26 Feb 2000 21:36:41 -0000
> To: ford-trucks.com>
> Cc: <61-79-list ford-trucks.com>
> Subject: [61-79-list] hows that
>
>
> you can always tell a sniveling,mean spirited jackass by his potential for
> meanness to small animals and probably anything else small or weaker!HOWSTHAT!
>
What do you mean 'howsthat'? 'That' is no better than the comments you are
referring to. Time to stop acting like children here and get back to a
common interest.

Just thinking,

Josh


------------------------------

Date: Sat, 26 Feb 2000 22:31:08 -0700
From: "Kiernan, Denny" wenet.net>
Subject: Re: hows that

I'm glad someone responded to that.

david wrote:
>
> you can always tell a sniveling,mean spirited jackass by his potential for meanness to small animals and probably anything else small or weaker!HOWSTHAT!

------------------------------

Date: Sat, 26 Feb 2000 23:50:28 -0700
From: "Kiernan, Denny" wenet.net>
Subject: Re: hows that

Sorry about that last post to the list, It was supposed to be a private
post, but I goofed up. Didn't mean to extend this thread on FTE

Kiernan, Denny wrote:
>
> I'm glad someone responded to that.

------------------------------

Date: Sun, 27 Feb 2000 09:59:16 -0500
From: Ken Payne ford-trucks.com>
Subject: ADMIN: Ford press releases

Five press releases from Ford have been added to the
news section of the site (linked off the main page of
the site, www.ford-trucks.com).

Included is information on the 2001 Ranger Edge, the
2000 Escape and F150 Harley-Davidson pricing.

Ken Payne
Admin, Ford Truck Enthusiasts



------------------------------

From: "Tim and Pam Allgire" williams-net.com>
Subject: Re: hows that
Date: Sun, 27 Feb 2000 14:07:23 -0500

Yeah,a common interest like Ford Trucks!!!That is what this forum is
supposed to be about.
-----Original Message-----
From: Josh Keady wizzards.net>
To: 61-79-list ford-trucks.com <61-79-list ford-trucks.com>
Date: Sunday, February 27, 2000 12:16 AM
Subject: [61-79-list] Re: hows that


>
>
>> From: "david" prodigy.net>
>> Reply-To: 61-79-list ford-trucks.com
>> Date: Sat, 26 Feb 2000 21:36:41 -0000
>> To: ford-trucks.com>
>> Cc: <61-79-list ford-trucks.com>
>> Subject: [61-79-list] hows that
>>
>>
>> you can always tell a sniveling,mean spirited jackass by his potential
for
>> meanness to small animals and probably anything else small or
weaker!HOWSTHAT!
>>
>What do you mean 'howsthat'? 'That' is no better than the comments you are
>referring to. Time to stop acting like children here and get back to a
>common interest.
>
>Just thinking,
>
>Josh
>
>==========================================================
>To unsubscribe, send email to: listar ford-trucks.com with
>the words "unsubscribe 61-79-list" in the body of the
>message.
>


------------------------------

Date: Sun, 27 Feb 2000 13:06:34 -0800
From: Jason Derra internetcds.com>
Subject: Re: Rebuild Question

Take it to a machine shop and have it hot tanked.
Jason

Christopher Worley wrote:

> I am rebuilding a 352 (my first rebuild) the question is: Is there any
> chemical that will clean the water passages in the block, I have been using
> hotwater and soap but it isn't removing it too good.
>
> Chris
> '67 F100
> ______________________________________________________
> >
> ==========================================================
> To unsubscribe, send email to: listar ....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.